Tail Lights

[MY33]

How can i get all four of my tail lights to work when my lights are on. At the moment the outside two come on when i turn my lights on and the inside two come on when i brake. i want all four to b on when i turn my lights on.

[JnJ]

have you checked your wiring? make sure that the wire for that particular part of taillight is connected

[MY33]

i want all four to be on when i have my liughts on and go brighter when i brake.

We had a look at the wiring and it looks all good.

do all four lights come on, on other r33's? when their lights are on?

thanks

[GAIJIN-180sx]

Alot of skylines have that problem apparently its the wiring just getting old and faulty as 10 to 15 year old cars do...it could also be the fact that water has a habbit of finding it way into skyline rear lights and it shorts the circuit out...best to take it to an auto elec.

[4door_Sleeper]

First pull out the globes and check if they are single or double element globes/ (only double element globes will be able to give you the effect you want) If you are lucky the problem could be that someone has put the wrong globes in.

[HOSTILE]

Had the same deal on my old 32... the wires were cut as part of the compliance process, I simply rejoined them and presto...

[JnJ]

mine was all on when breaking before. but i cut the wires for the inner lights so only the outsides lights turn on i like it i think its alot better ^^, when i twist the switch for the light the taillights turns on, but only still the lights on the outside brightens when breaking. jst check the wire again if not yeah check the globes

[MY33]

thanx for that. i think i have to get the double element globes. i think that will work if no then il take it to an auto elec coz i want all four to come on.