Jump to content
SAU Community

Installing Power Fc

JD-33
 Share

Recommended Posts

JD-33 Community Regular

JD-33

Posted
Posted

Hi All,

Quick question..

How easy is it to install a power fc ? A matter of plug and play with the 33 gtst?

I googled this..

"Installation is as easy as replacing the factory ECU. (Some minor rewiring is required on select vehicles.) "

Is the 33 one of those cars which require "minor re-wiring" ?

Thanks in advance..

Cheers,

-JD

Link to comment
https://www.sau.com.au/forums/topic/115922-installing-power-fc/
Share on other sites
insu Rising Star

insu

Posted
Posted (edited)

Have you run any searches?

In short answer: No you don't need any re-wiring in order to fit a power Fc to an R33 gts-t (not completely true as Paul33 has a DIY of some basic wiring adjustments that have to be made to A-LSD spec skylines only).

You literally just remove the kick panel from the passenger compartment and remove the old computer and replace the loom straight into the power fc.

If you want more info, run some searches, there is a shipload of information on this subject.

Edited by insu
JD-33 Community Regular

JD-33

Posted
  • Author
Posted (edited)

yes, yes you are :wave:

Ok, had a brief skim of the document.. just wondering if anyone else has their ecu in the boot (like me) and if so,

how does the hand controller go in terms of cord length reach?

Cheers

Edited by JD-33
insu Rising Star

insu

Posted
Posted

Ecu in your boot hey?

I haven't heard of the ECU being mounted there...

There is your battery and some other electronic stuff there, I can't remember what (maybe abs or something?).

As far as I knew, every model of R33 skyline from the GTS to the GTR had the computer in the passanger kickpanel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      Rb26/30 build

      By r32-25t · Posted

      You’ll want to have the block drilled and tapped to suit 1/2in head studs and the head for the same. How much power do you intend to make?
    • hoodedreeper
      Chris' R34 GTT Series 2

      By hoodedreeper · Posted

      Sorry for resurrecting an oldish thread Not much has happened in the past year since the last update. The car did another 1000 miles or so and failed the MOT for the first time in October (failed on tyres which had been advised for a couple of years) In October the car got put up for sale and was removed in November due to no interest, being so close to christmas it was to be expected. The roads were dry in February so I decided to tax it early and get the new tyres fitted.   Fast forward to April, I got someone in to give the car a good clean after sitting for the winter.                                 The car got re-advertised and today (Saturday 3rd May) the car sold. The new owner is planning a GTR conversion at some point and a respray in the same pearl white. It's bitter sweet, it's a shame to have the car sit there for half the year and then only do 1000 miles. The kids are growing too quick and space in the back is getting limited. It's been a great 6.5 years of ownership
    • MBS206
      Rb26/30 build

      By MBS206 · Posted

      And if you want more power, more reliably, and cheaper, go get the Aussie RB... The 4L Barra and put that in instead.
    • MBS206
      Nismo rear spats

      By MBS206 · Posted

      No cats will keep discolouring the rear bar. Sends white paint a weird yellow stain. Cut and polish normally gets it out, but you'll be doing that every fortnight I found.
    • Butters
      Rb26/30 build

      By Butters · Posted

      Both heads will be equally reliable or unreliable depending on what you do to them.  Stock the RB26 head will flow more. You have access to the stock intake ITB manifold on the RB26 cheaply which flows really well(1000hp+).   Arguably more aftermarket support for RB26, though in Aus we love our RB30 SOHC heads too.    The only downsides to the RB26 head is if you have a VL commodore and want to keep the SOHC look.  Where you may have an issue is drilling out the rb30 block for the bigger head studs but if you are building a big power motor you'd probably put bigger studs on the SOHC head too.  This is just about finding a good machine shop, sometimes easier said than done.  RB30 head worked can make big power just like a Rb26 head, so really it actually more comes down to what your preference is for your car.  People now even making billet versions of both.
×
×
  • Create New...