Jump to content
SAU Community

Recommended Posts

just wondering...

when have you got the o/d button on?

is it on all the time?

or do you put it in overdrive after 80 or something?

i was driving around with it always on as the light on the dash annoy's me [O/D OFF]

but then today i decided to punt around with it off for a bit and i like the way the car drives/ sounds better.

So...

When do YOU use it....?

Link to comment
https://www.sau.com.au/forums/topic/116208-when-do-you-use-od/
Share on other sites

i drive around with o/d on all the time.

O/D is a fourth gear only selectable in 3rd gear via a 12V solenoid switch.

I too hate the light.

The reason the car sounded better was because at above 60km/h where it would be in O/D, the car was still in a lowered gear and made a better song.

I also use O/D when on the dyno to keep the car in 3rd gear.

I also use O/D when driving 170km/h+.....mainly because I've run out of 3rd by then :D

To be honest, Ive never taken O/D off on the road.

if you dont use OD all the time that means your engine is always operating at high rpms which equals to more fuel consumption

i alwasy use OD all the time with any cars.

Only disengage OD when i want a quicjker responses in gear change for over taking.

if you dont use OD all the time that means your engine is always operating at high rpms which equals to more fuel consumption

i alwasy use OD all the time with any cars.

Only disengage OD when i want a quicjker responses in gear change for over taking.

Incorrect, only at a speed above which the gear box would change up into fourth and then engage the lock up converter will you be using more fuel (higher RPM). True, that fouth would be engaged most of the time during normal driving, but that does not mean that the engine "revs harder" when overdrive is switched off.

To the smarties with manuals, enjoy peak hour won't you!

Cheers

Luke

Incorrect, only at a speed above which the gear box would change up into fourth and then engage the lock up converter will you be using more fuel (higher RPM). True, that fouth would be engaged most of the time during normal driving, but that does not mean that the engine "revs harder" when overdrive is switched off.

To the smarties with manuals, enjoy peak hour won't you!

Cheers

Luke

soz wat i meant was when you are in OD and if you disengages it it down shift to 3rd in turn higher rev. Just a matter of how much torque your car has. The more torque the less u need to change your geards.

This is especially true for a diesel engine.

Dont forget i have a trustworthy Landcruiser 100 series with 1hz rngine tuborcharged intercolled baby!! :)

Im always flicking between O/D on and off........ under 60kmph then I dont see a need of O/D, around 80 then yes, I have O/D on. Going up or down hills I keep O/D off.......... no problem using the gearbox for the way it was designed!

well thats a product to fix that jerking feeling when it changes gears though. especially in an auto.

Its the Nulon uto transmission additive. its really good. I put one in into my lancruiser auto trans when i had it for service and it totally smooth and it change into gears w/o the jerking feeling and very smooth. I recommend it. I even put the additive for the diff and the tranfer case and it cuts the cabin noise by half. I put it into the 2 diffs and the transfer case. it works wonders.

im planning to use the additive on my 260rs when its time to chaange the transmission and dill oil as well as the tranfer case.

Edited by stasis

The POWER button changes shift points and how long gears hold for (shift points really) it doesn't open up the 3 extra cylinders... Maybe it should be called "sport" mode not power?

As far as I know anyway...

Luke

  • 5 months later...

This chart is interesting. Which Series is this for Ian?

My S2 will do 125 kmh on the rev limiter in 2nd gear, quite a bit more then the 110 listed above.

Havent checked the upper limit of the other gears yet.

My series 2 (auto) has no "O/D off" button and no "power" button so I guess that makes the whole "do i leave it on or off?" thing pretty simple :thumbsup:

I think the rationale is that the tiptronic pretty much replaces the other two. Plus it will still hit power mode if I put my foot down hard. But I would prefer the option to use power mode and still have it change gears for me.

I read somewhere that power mode not only changes the shift points, it also makes the throttle more sensitive and generally "feels" more responsive. Thats how it worked on my turbo silvia anyway. :laugh:

I too leave it on all the time except when going down big hills that we have around here. When overtaking I just go, I like the rush between 70 and 140.

**thinking out loud ** ...u definately like speeding tickets and demerits too

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
×
×
  • Create New...