Jump to content
SAU Community

Recommended Posts

Okay, i went to the NGK website and found the part numbers for the o2 sensors that should go in my R32 GTR, but i have rung around and no-one has them in stock, they are NGK-OTD2F-P1P, but then i went searching and found that the nissan silvia SR20DET engine uses the same plug...but to add to that, i went to but some o2 sensors for a SR20DET and the dude is telling me the part number is NGK-OZA395-E2. will these work or do they need to be the OTD2F-P1P sensors? and where can i get them from if anyone knows :S thanks...

Link to comment
https://www.sau.com.au/forums/topic/116364-gtr-oxygen-sensors/
Share on other sites

Me? I have a set for sale R32 GTR :P

http://www.skylinesaustralia.com/forums/in...opic=115107&hl=

There are two part codes for GTR sensors are they are different connectors on each sensor (front to rear)

Nissan is where everyone gets them from as far as i understand... although they want $420+

You didn't search very well :P

http://www.pcug.org.au/~jdeakins/facts.html

PM "GTaaargh" and ask if he has the NGK part numbers (and a source) for the front and rear as he has been in touch with a tech at NGK.

Otherwise, now is a good time to become an SAU member and take advantage of discounted Nissan parts. Or buy Ash's O2 sensors.

ford el falcon series happens to suit R33 GTST only.

it just happens to be in same voltage scale and range.

If you ask for a ford el falcon oxygen sensor you get an OEM generic brand oxygen sensor and it just happens it fits the R33 dump and voltage matches

if your trying to improve fuel economy I have looked into this too.

Most people i have spoken to get 300-350kms per tank around town so in my case thats what I'm getting, so I am going to save my money in the o2 sensor departmant.

I wish I could get better than that!

good luck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It doesn't really answer your question...but is the head unit full android or just android auto, are you happy with how quickly it boots and responds, and do you have a link?  If we can identify good Android alternatives it will really help people stuck with Japanese screens. Did it have a separate reverse camera input so you would replace the factory one, or are you just going without now...that would be a pretty big steps back. And finally, do you have a picture of the "wire" that you can't plug in? Most likely it is some sort of aerial that is not too important eg japanese traffic or am radio or something if you haven't noticed a functionality issue
    • haha funny enough I did ask him wtf he had been up to with the electrics....but no answer
    • For a daily just run Akebono ceramic pads. That's what they're optimized for. Obviously don't try to run it on track or anything like that.
    • Hey all, I'm sorry if this has been discussed before.  I have a 2008 Japanese import V36 coupe with nav but without Bose. I bought one of those AliExpress android screens, which for the most part works really well.  The only thing that doesn't work is the air con controls (well sort of) and the factory reverse camera.  The AC can be controlled fine but it doesn't report the change in temp and mode to the screen, and the volume knob/other audio controls from the panel don't register on the learning app.  I am pretty certain that the problem is the difference in the head unit between base model (Nav but no Bose) 2007-2009 coupes and anything after 2009.  Mine is the one with the blue connector all the way to the right as seen in this forum post:  The reason I think this is there is one wire left over that doesn't fit anywhere on this head unit, or in the factory screen which also uses different connectors to more recent versions.  I've seen the upgrade from OWC, and have sent the guy a message on eBay but no response yet.  I also don't particularly need the whole kit, just *maybe* an adapter for this one cable.  Did anyone else here have the same problem, or have any insight about what I can do to get this working?  I have been in contact with the seller but all they seem to be able to do is ask for more pictures and videos. Minor edit to add:  I have been researching and found a screen on Aliexpress that actually specifies my head unit in the listing, so these things do exist.  I will contact the seller to see if the wiring adapters are interchangeable with other screens.   Thanks in advance!
×
×
  • Create New...