Jump to content
SAU Community

Recommended Posts

hey all.

im fairly new to the skyline... infact japanese import scene in general. just recently purchased a 1995 nissan skyline R33 GTS-T. it only had 51,000km on the clock.

ok before you laugh and say what an idiot. a 1995 skyline with so few k's? i thought the exact same thing. i did do alot of umming and arrring before i bought this car. i got it fully checked out, i looked over it myself and test drove it. i was astonished, the interior and exterior were immaculate. not a scratch or dent in the body anywhere. no marks or tears or anything in the interior, everything worked as it should. so i was beginning to think it can't be too far away from what's on the clock, even if it is wound back alittle out of japan.

then i found this. 100,000km sticker right smack bang on top of the engine. i did look under the bonnet. but i think i looked everywhere except for the easiest place to look, top of the engine haha.

the sticker is completely in japanese and i can't read it... only thing i can read is the 100,000km part. i have bin told that the sticker means its gone through its 100,000km service. then ive bin told the sticker just says the timing belt needs to be changed at 100,000km. before i bought the car, the guy changed the timing belt for me anyway.

so my question is, does anyone know wat the sticker means? do they have it on their cars? and if so, is there anyway to tell really how far it has gone past 100,000km? car has no log books etc which dosent surprise me.

thanks in advance,

brendan

post-28689-1146892012.jpg

Link to comment
https://www.sau.com.au/forums/topic/116606-are-my-worst-fears-confirmed/
Share on other sites

I've heard the same as you, could be timing belt to be changed at 100,000 or it has had it chnaged at 100,000..

A car with 100,000ks on it can still be in very good condition, average person may do 20,000k/y, = 5 years of driving, go check out a 5 year old car, there will be lots out there that look immaculate...

Either way don't stress to much, the main thing is the condition of it, not the number that the odo says..

Speaking as a mechanic in the jap import industry, that sticker is there from factory to make it clear that the belt is to be changed. The japanese are going back to chain driven cams, so this may give them a proper reminder.

I know on the GTR engines there is also a tag on the crank angle sensor that must be torn to adjust the timing. When you by a timing belt from Nissan you get a sticker to put on the engine, which you write the next belt change on, and also the sticker to go over the crank angle sensor once the timing is set.

In my experiance (8 years in automotive industry) the actual kilometers a vehicle has travelled isn't all that useful in determining if the car is a decent piece of kit or a rooted out piece of junk. I've seen cars with 250,000 kms look like new. and I've seen cars with 50,000 kms that are good only as scrap.

So take your time and check wearing parts like suspension and steering, brakes, and condition of things like hoses etc. you'll get a better indication of that rather than the speedo. My vl turbo had done over 200,000 kms when i bought it, now its nearly done 350,000 and the main issue ive had is an alternator.

Ok my R32 has no sticker on the timing cover, does this mean that the timing belt has been done??? I actually think someone may have taken it off or came off? Is there any other way of telling if the timing belt has been done recently??

ahh ok thats good then. thanks guys

Exactly the same situation mate, bought mine at 73K on the clock, looked immaculate everywhere, but when i reached 100K the odo stuck and also doesn't line up quite properly, which is a sure sign its been wound back. Like ferni says, worry about the actual condition more. I'm on 140K at the moment and haven't had any major issues that weren't caused by myself or someone else.

timing belt change is expensive, but new engine is even more expensive :D

For the record, on a R32 GT-R its about $400 if the water pump needs replacing (and possibly more if any of the tensioners/guides are worn).

My car is finally getting its belt changed this coming friday; I'll be able to sleep that little bit easier :P

Yeh I recently imported my 1990 r32GTST its in great condition,but its done 115ks and Im getting my timing belt done next month as my sticker has faded and cant make out when timing belt was done..

Just to be on the safe side, Id rather pay the money.. as dont want my car to die :P

well the guy at the used car yard changed the timing belt for me anyway, to be on the safe side. so that's no worries. just was more concerned with the condition of the rest of the engine... ie how good a nick the turbo would be in.

i have a sticker on top of my engine (r33) and it had 68, XXX km on it. Would this mean they changed the timing belt at those km's?

I bought my car when it had 77, XXX km on it a few years back. It's on 103, XXX now and when i came up for the 100 000km service my mechanic said the timing belt had already been changed. So i assume that this is what the sticker indicated...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...