Jump to content
SAU Community

Recommended Posts

hey all.

im fairly new to the skyline... infact japanese import scene in general. just recently purchased a 1995 nissan skyline R33 GTS-T. it only had 51,000km on the clock.

ok before you laugh and say what an idiot. a 1995 skyline with so few k's? i thought the exact same thing. i did do alot of umming and arrring before i bought this car. i got it fully checked out, i looked over it myself and test drove it. i was astonished, the interior and exterior were immaculate. not a scratch or dent in the body anywhere. no marks or tears or anything in the interior, everything worked as it should. so i was beginning to think it can't be too far away from what's on the clock, even if it is wound back alittle out of japan.

then i found this. 100,000km sticker right smack bang on top of the engine. i did look under the bonnet. but i think i looked everywhere except for the easiest place to look, top of the engine haha.

the sticker is completely in japanese and i can't read it... only thing i can read is the 100,000km part. i have bin told that the sticker means its gone through its 100,000km service. then ive bin told the sticker just says the timing belt needs to be changed at 100,000km. before i bought the car, the guy changed the timing belt for me anyway.

so my question is, does anyone know wat the sticker means? do they have it on their cars? and if so, is there anyway to tell really how far it has gone past 100,000km? car has no log books etc which dosent surprise me.

thanks in advance,

brendan

post-28689-1146892012.jpg

Link to comment
https://www.sau.com.au/forums/topic/116606-are-my-worst-fears-confirmed/
Share on other sites

I've heard the same as you, could be timing belt to be changed at 100,000 or it has had it chnaged at 100,000..

A car with 100,000ks on it can still be in very good condition, average person may do 20,000k/y, = 5 years of driving, go check out a 5 year old car, there will be lots out there that look immaculate...

Either way don't stress to much, the main thing is the condition of it, not the number that the odo says..

Speaking as a mechanic in the jap import industry, that sticker is there from factory to make it clear that the belt is to be changed. The japanese are going back to chain driven cams, so this may give them a proper reminder.

I know on the GTR engines there is also a tag on the crank angle sensor that must be torn to adjust the timing. When you by a timing belt from Nissan you get a sticker to put on the engine, which you write the next belt change on, and also the sticker to go over the crank angle sensor once the timing is set.

In my experiance (8 years in automotive industry) the actual kilometers a vehicle has travelled isn't all that useful in determining if the car is a decent piece of kit or a rooted out piece of junk. I've seen cars with 250,000 kms look like new. and I've seen cars with 50,000 kms that are good only as scrap.

So take your time and check wearing parts like suspension and steering, brakes, and condition of things like hoses etc. you'll get a better indication of that rather than the speedo. My vl turbo had done over 200,000 kms when i bought it, now its nearly done 350,000 and the main issue ive had is an alternator.

Ok my R32 has no sticker on the timing cover, does this mean that the timing belt has been done??? I actually think someone may have taken it off or came off? Is there any other way of telling if the timing belt has been done recently??

ahh ok thats good then. thanks guys

Exactly the same situation mate, bought mine at 73K on the clock, looked immaculate everywhere, but when i reached 100K the odo stuck and also doesn't line up quite properly, which is a sure sign its been wound back. Like ferni says, worry about the actual condition more. I'm on 140K at the moment and haven't had any major issues that weren't caused by myself or someone else.

timing belt change is expensive, but new engine is even more expensive :D

For the record, on a R32 GT-R its about $400 if the water pump needs replacing (and possibly more if any of the tensioners/guides are worn).

My car is finally getting its belt changed this coming friday; I'll be able to sleep that little bit easier :P

Yeh I recently imported my 1990 r32GTST its in great condition,but its done 115ks and Im getting my timing belt done next month as my sticker has faded and cant make out when timing belt was done..

Just to be on the safe side, Id rather pay the money.. as dont want my car to die :P

well the guy at the used car yard changed the timing belt for me anyway, to be on the safe side. so that's no worries. just was more concerned with the condition of the rest of the engine... ie how good a nick the turbo would be in.

i have a sticker on top of my engine (r33) and it had 68, XXX km on it. Would this mean they changed the timing belt at those km's?

I bought my car when it had 77, XXX km on it a few years back. It's on 103, XXX now and when i came up for the 100 000km service my mechanic said the timing belt had already been changed. So i assume that this is what the sticker indicated...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The plan is to get it out of the shed. The reality may fall some way short. But hope is as cheap as despair as they say. Will go a wide band I think. The coils are ok so maybe I’ll miss the $1500 on the R35 coils etc. Im still on the fence about a trigger kit. The HKS one looks nice ($1k) - not sure how it works with the Link or if Link prefer something else. Oil pressure is fine so I’m not that concerned there. Fuel pressure I’ll have a think about. The IAT got changed for the Link anyway as the old RB26 ones were really slow reacting and pretty poor. The Power FC just worked. Wasn’t terribly refined but it just worked. Probably made a mistake replacing it really. E85 isn’t available locally - it is 100+ kms away which puts it in the too hard basket. Lastly I understand Tunecorp in Perth are pretty good so was probably going there.   As for turbos is there are new age -5 drop in replacement? Turbos have come a long way in 20 years, everyone is big single which is fair enough but I prefer the old school complication of twins. Wasn’t chasing more power (well, not much more) but more efficiency would be ok.
    • I thought I'd share this....the shell is non genuine but they found or built a lot of the genuine parts. Plus, it is by far the best colour scheme of those years, the winfield once was particularly shit https://www.v8sleuth.com.au/written-off-inaugural-godzilla-recreated/
    • Good work Pete and glad the car held up well....been a while since I've seen you try properly
    • Just quick update, I've had tech issues and so a backlog on life stuff....I will pull lap times from the video and data from the ECU logs to do a proper update. But basically, in order of importance: 1. The car was excellent fun on the track, really felt a lot like the good old days. And nice to have AC while waiting 2. Coolant got really hot; again I need to pull and analyse the logs but the standard system is not up to tracking at 30o+ days, once the system was heat soaked after the first 2x15min sessions I could only do 3 laps before it got 110+ and I had to cool down. If I can't improve that it is a deal breaker 3 Oil temps were fine all day, noting it was short sessions due to 2. I think it will likely need work 4 Biggest surprise AT temps were fine, never went over 100, I would have been OK with 120 before I was too concerned. The auto sucks compared to a manual (of course) but it is faster to launch and I just need to downshift it manually before hitting the throttle, then it was OK. When I post the vids you'll hear it telling me off (beeping) for trying to downshift too early (it needs about 3500 before it will downshift, depending on gear a little but we are mostly talking 3/2 and 4/3) 5 A052s were not great which hurt the lap times, but I will be constrained in what I can get in good tyres that fit the wheel wells. These were small for a heavy car at 235/45/18. In theory I can fit 9.5 on front and 10.5 rear (so not square) but I still need 670mm+ high tyres in good brands. 6 Standard shocks/springs/roll bar are too soft for track work (of course), but that was always on the list. And happily, no white on the mat, despite having a teenaged passenger, extinguisher mount was fine. Also, it was nice to have Wakefield Park back in action  . Because the car was so quiet it is eligible for Green Day, which I thought was a band but is apparently a series of cheaper practice days they run with a lower sound limit, that is a smart idea.  
    • Great to hear you are bringing it out of the shed again. Unless you have specific issues I'd just add the wideband, get a good tune and enjoy it. Certainly no point changing coils etc if they are working. If would add fuel pressure and e85 sensor if you are doing a general update but not if it runs OK and you are just getting it back on track. The other thing is smaller, modern twins, -5 are OK for motorsport but pretty laggy and old tech for street use (of course, if performance is the priority a modern single with twin scroll manifold etc is the go but not cheap). The final thing worth considering is switching to an ethrottle if drivability is still an issue, it should make things a lot simpler and smoother
×
×
  • Create New...