Jump to content
SAU Community

Recommended Posts

hey all.

im fairly new to the skyline... infact japanese import scene in general. just recently purchased a 1995 nissan skyline R33 GTS-T. it only had 51,000km on the clock.

ok before you laugh and say what an idiot. a 1995 skyline with so few k's? i thought the exact same thing. i did do alot of umming and arrring before i bought this car. i got it fully checked out, i looked over it myself and test drove it. i was astonished, the interior and exterior were immaculate. not a scratch or dent in the body anywhere. no marks or tears or anything in the interior, everything worked as it should. so i was beginning to think it can't be too far away from what's on the clock, even if it is wound back alittle out of japan.

then i found this. 100,000km sticker right smack bang on top of the engine. i did look under the bonnet. but i think i looked everywhere except for the easiest place to look, top of the engine haha.

the sticker is completely in japanese and i can't read it... only thing i can read is the 100,000km part. i have bin told that the sticker means its gone through its 100,000km service. then ive bin told the sticker just says the timing belt needs to be changed at 100,000km. before i bought the car, the guy changed the timing belt for me anyway.

so my question is, does anyone know wat the sticker means? do they have it on their cars? and if so, is there anyway to tell really how far it has gone past 100,000km? car has no log books etc which dosent surprise me.

thanks in advance,

brendan

post-28689-1146892012.jpg

Link to comment
https://www.sau.com.au/forums/topic/116606-are-my-worst-fears-confirmed/
Share on other sites

I've heard the same as you, could be timing belt to be changed at 100,000 or it has had it chnaged at 100,000..

A car with 100,000ks on it can still be in very good condition, average person may do 20,000k/y, = 5 years of driving, go check out a 5 year old car, there will be lots out there that look immaculate...

Either way don't stress to much, the main thing is the condition of it, not the number that the odo says..

Speaking as a mechanic in the jap import industry, that sticker is there from factory to make it clear that the belt is to be changed. The japanese are going back to chain driven cams, so this may give them a proper reminder.

I know on the GTR engines there is also a tag on the crank angle sensor that must be torn to adjust the timing. When you by a timing belt from Nissan you get a sticker to put on the engine, which you write the next belt change on, and also the sticker to go over the crank angle sensor once the timing is set.

In my experiance (8 years in automotive industry) the actual kilometers a vehicle has travelled isn't all that useful in determining if the car is a decent piece of kit or a rooted out piece of junk. I've seen cars with 250,000 kms look like new. and I've seen cars with 50,000 kms that are good only as scrap.

So take your time and check wearing parts like suspension and steering, brakes, and condition of things like hoses etc. you'll get a better indication of that rather than the speedo. My vl turbo had done over 200,000 kms when i bought it, now its nearly done 350,000 and the main issue ive had is an alternator.

Ok my R32 has no sticker on the timing cover, does this mean that the timing belt has been done??? I actually think someone may have taken it off or came off? Is there any other way of telling if the timing belt has been done recently??

ahh ok thats good then. thanks guys

Exactly the same situation mate, bought mine at 73K on the clock, looked immaculate everywhere, but when i reached 100K the odo stuck and also doesn't line up quite properly, which is a sure sign its been wound back. Like ferni says, worry about the actual condition more. I'm on 140K at the moment and haven't had any major issues that weren't caused by myself or someone else.

timing belt change is expensive, but new engine is even more expensive :D

For the record, on a R32 GT-R its about $400 if the water pump needs replacing (and possibly more if any of the tensioners/guides are worn).

My car is finally getting its belt changed this coming friday; I'll be able to sleep that little bit easier :P

Yeh I recently imported my 1990 r32GTST its in great condition,but its done 115ks and Im getting my timing belt done next month as my sticker has faded and cant make out when timing belt was done..

Just to be on the safe side, Id rather pay the money.. as dont want my car to die :P

well the guy at the used car yard changed the timing belt for me anyway, to be on the safe side. so that's no worries. just was more concerned with the condition of the rest of the engine... ie how good a nick the turbo would be in.

i have a sticker on top of my engine (r33) and it had 68, XXX km on it. Would this mean they changed the timing belt at those km's?

I bought my car when it had 77, XXX km on it a few years back. It's on 103, XXX now and when i came up for the 100 000km service my mechanic said the timing belt had already been changed. So i assume that this is what the sticker indicated...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...