Jump to content
SAU Community

Wierd Problem.....

Chi100188

By Chi100188,
in Western Australia

 Share

Recommended Posts

PAV34 Mentor

PAV34

Posted
Posted
the problem is when i drive for a bit there is a bit of hot air like coming from where my legs are located....i have all the heater and stuff off and there is hot air?....is that normal is or something like busted up?

Cheers

Chi

this may be the cause....

before you turn off the heater do you put the temperature down??

even if the heater is off, you will still feel some hot air come through when you leave the temp up.

if this is the case, then its normal.

Link to comment
https://www.sau.com.au/forums/topic/116969-wierd-problem/#findComment-2150484
Share on other sites
Chi100188 Mentor

Chi100188

Posted
  • Author
Posted

oh true haha my bad i leave my heater on 32 degrees....and like i get these hot air and im like OMFG wtf hahahah my mates are like MAN UR SKYLINES OVERHEATING....scared me to the shite hahah but yea cheers guys ill put the heater temp to the lowest hahahah....btw is there a point to buy a safc 2 ? would i save a bit on petrol or ?

Link to comment
https://www.sau.com.au/forums/topic/116969-wierd-problem/#findComment-2151815
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • KKaplumbaa
      SR20 to cefiro

      By KKaplumbaa · Posted

      Yeah, you are right. It seems easier and more reasonable to boost the engine. And as you said the blocks are very similar but the cylinder bores are different.
    • sunsetR33
      Anyone know this frontpipe?

      By sunsetR33 · Posted

      Sound logic, but in actuality way more illegal than just having the wrong pipe. Normally, doing something like that would be forgery. Meaning you may have certain documentation for vehicle parts, but the actual parts are different ones and you just assign them the numbers and badging from the documents. But nevermind that. Nonetheless, I AM curious if this pipe was ever made by any official manufacturer this way, because I honestly am not familiar with this pipe layout and shape. As I will be putting on the HKS Silent Hi Power once my exhaust gaskets arrive, as long as it sounds right I will just roll with this front pipe. I can always order the actual Mines part if I run into legal issues. It would be an unnecessary expense as there is lots of other problems I have on this car as of now.
    • GTSBoy
      Anyone know this frontpipe?

      By GTSBoy · Posted

      So, weld a plate with the Mines logo laser cut into it, onto it. Instant Mines pipes, whether they were or weren't originally.
    • GTSBoy
      SR20 to cefiro

      By GTSBoy · Posted

      I don't know if the blocks are "the same". They will be very very similar. Obviously, either the bore or the stroke is going to be bigger on the 20. If the bore is bigger, then the 18 head is unlikely to fit properly. If the bore is the same, then you can almost certainly fit the CA18 head, but there migth be a few fun things you have to do to make water galleries (or other things) line up properly. Or... it could just be real easy. Is it worth the effort? Almost certainly not. You can make nearly as much power on a 2 valv ehead as you can on a 4 valve. There's not any "magic" in a 4 valve head.
    • DRoc81
      Shifting questions

      By DRoc81 · Posted

      Yes, me too!!!!  I need to find a something that has all the abbreviations for what these cars have LOL
×
×
  • Create New...