Jump to content
SAU Community

Recommended Posts

1994 Model 180sx

Has 12months rego and it was renew today

Was Imported and Complied In October 2005

Car was a Sev's Test Car so need to be in Mint condition

was a grade 4 car in japan at auctions

91,XXXKms

SR20DET Black Top Motor

5spd Manual

Unknown Aftermakret Jap Clutch

Jap Double Din CD/Tape Player

Tomei Short Shifter

Trust Power Extreme 2 Cat Back

Trust 3inch Front Pipe

Drift Pod Filter

Blitz RVIT

Momo Steering Wheel

Apexi 1.8Bar Boost Guage On Pillar

HKS Type 0 Turbo Timer

Rays Engineering Gram Light 57C Rims, 17x7.5 +30 and 17x8.5 +40

Dunlop Direzza DZ101 215/45/17, 235/45/17 Tyres 90% ($330 Each Brand New)

Full Respray in Flat White and Black at start of March, Engine Bay was also reprayed

GP Sports G Sonic Bodykit

AAR Leather Drivers Seat

Clear front and side indicators

This car has been taken car of, All fluids were replaced in November and Oil and Spark plugs were replaced after 2000kms just to make sure. Car has only done 3000kms in Aus as i dont travel far to work. Car was imported with 88,500kms

This car is one of the cleanest 180's i have seen

Car was Imported By Energy Imports in QLD

Car was Complied by Adrenalin Imports In QLD

All bodywork was done by Roshan from Driftline Racing in Vic.

Looking for $17,000ONO

Carsales Link

1254146.jpg

1254149.jpg

1254156.jpg

1254153.jpg

Edited by SLYSX
Link to comment
https://www.sau.com.au/forums/topic/117091-nissan-180sx-1994-model/
Share on other sites

  • 2 weeks later...
PRICE DROP TO 17K ONO

MYR33T - Thanks dude, yeah i love the car but iam looking at something else different.

Yeah my friend has a sexy 180 thats prety much looks exactly like yours... its his drift pig.. I love his car

  • 4 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...