Please Help Info On Stroking Rb 20

[Muffa180]

Hi people im sure this has been covered before but couldnt find much when i did a search. Im looking at stroking an rb20 with r32 rb26 crank and rods but arent too sure of pistons to use. Will the stroke be increased to 2.4 with standard rb20 pistons? Also will the pistons touch the combustion chamber?

I wanted to know these things before i bought the crank and rods and found out for myself. Thanx for any help.

Michael..

Edited May 10, 2006 by Muffa180

[neil_se]

omfg its Michael! Type rb24 or rb23 into the search engine and you'll find heaps.

Ah stuff it, here you go.

http://www.skylinesaustralia.com/forums/in...lite=%2B%2Brb24

Edited May 10, 2006 by neil_se

[FATGTS-R]

As above, do a search as its been covered many times but just to add if you are going to use an RB26 crank dont use the R32 item due to the oil pump drive issue.

"waits for Ash to lock thread"

[R31Nismoid]

And i aint far away.

I've used the search button for you.

Using "RB24*" & "RB23*"

http://www.skylinesaustralia.com/forums/in...topics&hl=&st=0

http://www.skylinesaustralia.com/forums/in...lite=%2BRB23%2A

Enjoy the reading. There are heaps of threads to look through with many different options

Cheers