Jump to content
SAU Community

Recommended Posts

hey guys got my yellow off today, not i dont wanna get another one. just wondering what i can get permits for, such as my BOV, Gauges etc. tell me what you guys have got permits for and what are the standards. Mod i am thinking of doing is a HKS SSQ BOV, Alloy wing, front mount intercooler, exhaust, Du-luck body kit, vertial doors, tint.

thanks

Link to comment
https://www.sau.com.au/forums/topic/117295-permits/
Share on other sites

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

on my car i got pretty much permits for everything but end of the day the cops will still ping u if they want to be c***s

but yer i got permits for the following mods

bov, pod, exhaust, gauges on pillar, rsm on dash, intercooler, pfc, ebc, catch can, strut brace

Link to comment
https://www.sau.com.au/forums/topic/117295-permits/#findComment-2156728
Share on other sites

permits dont mean sh*t in my opinion......

traffic cops need to make targets, if they want to sticker you, they will.

As for getting permits, a non atmo venting bov could be permitted, an alloy wing could be presumably it would have to be within certain width/length, front mount cooler needs to be behind bumper. if it is then u dont need a permit for it at all. exhaust needs to be under 91db and have more that 100mm clearance. not sure on body kits, window tint needs to be 35 grade or lighter, and vertical doors, by which i think you mean gull wing style? they would need to be engineered id say?!

Link to comment
https://www.sau.com.au/forums/topic/117295-permits/#findComment-2157009
Share on other sites

yeh at end of the day its all comes down to the mood of the guy pulling you over, they can still sticker you. The permit might or might not affect their decision. perhaps the permit makes it easier to get the yellow off? no need to convert everything to stock?

I have permits for atmo BOV, catch can, strut brace, suspension, pod, gauges, intercooler and piping

Didnt think it was possible to get permit for exhaust and ECU, maybe I'll give it a go next time.

Link to comment
https://www.sau.com.au/forums/topic/117295-permits/#findComment-2157336
Share on other sites

lets just say that my exhaust is too loud, is that where i will have to get a permit? same with the front mount if it wasnt behind the bumper is that when i have to get the permit or is it just that i have to get the permit for the mod??

Link to comment
https://www.sau.com.au/forums/topic/117295-permits/#findComment-2157701
Share on other sites

hey

i got a yellow sticker on my dads r33 for the tint being too dark (what can i say 9% thats not dark :P ) and it had bov big exhaust and pod and they did not say athing about it, when we took it over the pits. so i dont kno if it was just the fact that they were in a good mood or what, as we thought the exhaust was way too loud. (dam hks super dragger :laugh: )

thanks kenny :P

plus any body see my a red r32 1BLR813 msg me or call me on 92508030 thanks was stolen today :P

Link to comment
https://www.sau.com.au/forums/topic/117295-permits/#findComment-2174754
Share on other sites

' date='14 May 2006, 10:15 PM' post='2166522']

drive normal and have the right attitude and u will have no need for permits...

if you get a yellow, take it on the chin, such is life and theres no point having a cry over it (even if it wasnt fair)

begin rant

I couldnt agree with you more Michael.

I'm not inferring anyone in this discussion does, but if you wear your ball cap contrary to manufacturers instructions (Y0), have the doof set to 11 and your chair in shuttle take-off position then you just make yourself a target. Drive like a citizen, pick your moment to impress the seat cover an maintain a low profile :fakenopic: Think carefully about the mods you want and how it\you will be percieved, when you invite attention, that's what you get.

Having said this, sometimes just owning a car and being a young person will be enough.

Life is unfair and yes, THEY :nyaanyaa: often dont know what THEY are looking at.

Rant end

Edited by Mr. Keets
Link to comment
https://www.sau.com.au/forums/topic/117295-permits/#findComment-2181229
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Good points thanks. Unfortunately I can't seem to rename this or delete the topic. Seems like I'll ask the moderators to change it or delete it.
    • You might want to update the thread title.  V37 ≠ V36.  And it probably isn't a G37 unless it is 2012+ Ininiti or LHD.
    • Just a basic run down of the relevant bolt-ons. All e85 First graph 406.9whp is HKS GT-RS, HPI manifold, 3" bell mouth dump / 3" straight through fake cat / 3" all the way to the rear and no resonators, nismo 740cc, walbro 460, oem RB26 itb's, power fc, eboost2, Greddy Spec M fmic, poncams, Turbosmart actuator, splitfires, ARD 150amp alternator. Blue line is same as above but Blitz Dual SBC (before i upgraded to eboost2) and 100cell "high flow" cat. Red line is after installing eboost2 and the fake 3" cat (it's just a 3" pipe with a cat shell welded onto it). Huge gains in response, as can be seen. Black dots are a mates sr20 with almost identical setup but uses a garrett 2871 instead oh HKS. Next grapghn 466.6whp is same as above, but HKS 2835 Pro S with the larger .87ar turbine housing, the special HKS Pro S dump pipe into a HPI split dual 2.5" front pipe and the rest stayed as is. Red line is after I welded the actuator brackets. (It was originally bolted together and was moving a couple millimetres under load). Green line is obviously before I welded the bracket, no other changes. 100whp gain at 3750rpm, massive gain for such a simple fix. Third graph is my current setup, huge changes. 469.7whp R31house twin scroll manifold, twin TiAl 38mm gates, Forced Performance (USA) HTA3076 with 1.01ar twin scroll rear housing, Link Fury+ and loom by 12volt, PRP trigger kit and r35 coil kit with r35 splitfire coils, HKS step 1 vct staggered cams, new oem lifters and performance springs, 49mm itb's w/port matched Nismo plenum, twin walbro 460 surge tank setup + 1650cc injectors, HKS Type R S13 600x300x103mm fmic, individual egt's, 4" turbo back with no resonators or cat and AES true straight through muffler + 4" butterfly off the dump pipe lower 90° bend. It's a preliminary tune with no boost control with using 20psi gate springs and 4" butterfly closed. Once body loom and PDM is compete, will go for 30psi tune.
    • Power light apparently functions as a transmission error light, you can try the power sequence to read any codes from the transmission control unit.  
×
×
  • Create New...