Jump to content
SAU Community

Recommended Posts

To do a GOOD job requires the car to be stripped, ie all windows out , wheels off , door trims off and if you are doing a full colour change properly then engine out and engine bay stripped.

If they aren't charging 6K for that , then they are too cheap and you get what you pay for.

Colour changing a car is a good way to spend a lot of money devaluing the car.

When the time comes to sell , most people prefer the unmolested , unsprayed original colour. Colour change to me denotes something slightly amiss and I price accordingly.

Get a quality 3 stage type polish , Mothers is my personal favourite but Mequiars is good.

Allow about 6 hrs and a lot of effort and follow the instructions ( ie. not in the sun , small amount at a time , allow to dry etc ) using all three stages including finishing with the carnuaba wax.

The results are usually stunning.

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/11741-new-paint-job/#findComment-205806
Share on other sites

too tell you the truth - i know black cars are a pain in the butt - i own two and my mum also owns one ( which has different paint speckles on it because my parents have a powdercoating business) - but getting maybe a professional buff done and a touch up on those scraches would be the way to go. Why buy a black car if you werent prepared for these things to show up anyway? If you have the money for a new paint job go for it - but i do agree with ken - as far as onselling the car goes keep the original paint.

Ive had the occasional touch ups on my car and it maybe the guy i use i dont know but it always blends with the car and it looks like new.

Link to comment
https://www.sau.com.au/forums/topic/11741-new-paint-job/#findComment-206228
Share on other sites

yeah mate i have a black 'line myself and its a b!tch to keep clean though on the few rare occasions that it is, it looks like a million bucks, well maybe $24,990 at least :)

anyone know a guy that can restore car paint to its original shine or at least give it a good polish? maybe can give that a go first before painting the car.

bambam

Link to comment
https://www.sau.com.au/forums/topic/11741-new-paint-job/#findComment-206318
Share on other sites

Lojikl

I done this last March.

Black R33 complete respray in black with peal blur through it.

I has the car taken bake to bare metal, all imperfections fixed, primed and painted. Also had fron bar modded for intercooler and a few other bits and pieces.....

took 9 weeks and cost over $6000.

Done by Lombaris Welshpool

Daniel

PS -i will never buy a black car again.....

Link to comment
https://www.sau.com.au/forums/topic/11741-new-paint-job/#findComment-207692
Share on other sites

Throghout the days when my car is an everyday driver it loooks like a piece of poo, water marks and leaves and dust cake up on it in a few hours after a wash! i have the dark red colour maybe not as bad as black but everything marks on the paint. if i don't wipe every bit of water off after a wash water stains are everywhere!!!

So before each show i have a friend who works for a detailing company who comes round my house and does a friendly deal for me as a cash job on the weekends. The paint comes up fantastic after cut buff polish like brand new! he really does fantastic job as some might have seen at shows.

I will ask if he can do a few personal jobs for people. at work he charges $300 as they are one of the highest quality detailers in WA. does porsches GT2 & GT3's alf barbagelos cars!

But for me normally about $65.... for everything besides shampoo of seats and stuff. put interior does get done nicely aswell :-)

Link to comment
https://www.sau.com.au/forums/topic/11741-new-paint-job/#findComment-207734
Share on other sites

a quick wash every 3 days does mine then once a week i use Mcquires beeswax on it and it comes up mint. With a black car you will always see swirls etc in the paint work the trick is to get a lot of wax built up on it so looking into the paint is like looking into a deep pond. i set a program eg was bonnet and roof one week doors the next etc etc

Link to comment
https://www.sau.com.au/forums/topic/11741-new-paint-job/#findComment-207770
Share on other sites

Thats nice price. I too have a black r33, not my choice of colour but when I was importing this one came up and was what I wanted in every way but colour so I took it anyway. I desperately need a good cut and polish (dont need the interior stuff, I do that myself) but I've never done a cut and polish myself and I'd rather get a pro to do it with a black finish (heard some bad stories of people doing their own black car).

Link to comment
https://www.sau.com.au/forums/topic/11741-new-paint-job/#findComment-207778
Share on other sites

Has anyone used that Bikiniwash mob? I was thinking of getting them to do my car and a friends as a Bucks day stunt - you know, girls not wearing much in front of a bunch of pissed seedy guys? hehe..

Good/Bad reports welcome. Don't want my car's paint to be ruined just for a laugh for the boys...

Link to comment
https://www.sau.com.au/forums/topic/11741-new-paint-job/#findComment-209142
Share on other sites

One would have to think that first they are pretty woman / models / strippers /out of work uni students and professional car detailers who know what they are doing with your paint a loooooooooooooong way second.

Cheers

Ken

ps And they are NOT cheap.

Link to comment
https://www.sau.com.au/forums/topic/11741-new-paint-job/#findComment-209162
Share on other sites

plus when we were going to have that raffle day and BBQ day a while ago they weren't to willing to lend us a hand.... how much were they going to charge us Joe? Some ridiculous appearance fee or something???

What goes around comes around I say, they don't scratch our back we don't scratch theirs!

Link to comment
https://www.sau.com.au/forums/topic/11741-new-paint-job/#findComment-209555
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
×
×
  • Create New...