Safc I Install - (thr) Query?

[Mr GTS4]

ok..here is the situation.. R32 gts-4 turbo.. was auto now manual with manual computer. hooked up safc I to car tonight and everything went was fantastic thanks to predators write up

but then noticed that the thr ( throttle ) % was sitting at 100% all the time... what the.. ok went over the wiring again and it was fine tried wiggling the wiring everywhere.. at the ecu or at the safc nothing makes a difference. also the % will flicker too, from so 100 to 60% for a flash. i also noticed that if you disconnect the wire the car misses. does anyone have any idea??

[paulr33]

its reading that signal from the TPS sensor

or the ground is farked

[Mr GTS4]

could this be playing havick on the ecu and fuel maps??

[smurf80]

When you checked your throttle position did you select the arrow up or down? Its in the screen where you select the number of cylinders your car has.

Chris

[Mr GTS4]

up to the right

[Mr GTS4]

ok tonight i have tried every other wire on the ecu that is related to the trottle position... nothing works. there are two that will give me 5.115v and the others do nothing.. could they be something wrong with my TPS or the ground of the ecu needs some attention??