Jump to content
SAU Community

Recommended Posts

its probably your coil packs. its a common problem in the r33's.

take them out and get the coil packs cleaned on the inside with some steel wool till theyre all nice and shiney on the inside.

its either that or your spark plug gap is too big (although 1.1mm should be fine on standard boost).

Link to comment
https://www.sau.com.au/forums/topic/117456-boost-issue/#findComment-2160411
Share on other sites

if theyre too far apart on higher boost the spark may get blown out by the force of the air entering the combustion chamber.

if the gap is smaller, the spark will have more of a chance of detonating the air/fuel at the right time as the spark has a smaller distance to travel.

a con of having a smaller gap is the spark wont be as powerful as a spark gapped at 1.1mm. this is why people buy splitfire coil packs and make their gap larger than the .8 that is recommended with standard coil packs.

hope that makes sence :D

Link to comment
https://www.sau.com.au/forums/topic/117456-boost-issue/#findComment-2161498
Share on other sites

yeah I concurr with everything that was just said! buy some XIs from Kudos motoesport in the trader section for 99 delivered...and also have a look at the coild backs for the hairline fracture...get some spitfires if u have the money...overwise do a dodge fix and u wil be set for a while...also while ur at it check ur leads...or just replace them...then u know everything is cool..

Link to comment
https://www.sau.com.au/forums/topic/117456-boost-issue/#findComment-2164389
Share on other sites

nah they dont need replacing, plus it isnt a dodgy fix if you're cleaning the inside of the coil packs with a dremil or steel wool.

over time they get a build up of crap inside them. this stops the route to the spark plug from being the shortest path to earth (which is how electricity behaves) as the build-up of crap is stopping the coils conduct with the spring properly under load. just clean out the shit inside it and you'll notice a huge difference. make sure you do it carefully though.

i did mine at around the beginning of last year and they were good till last december when i took my car off the road for blowing #6. and im sure they'll be fine for another few years. i even took the tape off when i did it and they worked just as well.. no missfire for a year.

heres what they look like before (not my coil packs):

IMG_4798Medium.jpg

and these are my coil packs after cleaning them:

DSC00577.jpg

Link to comment
https://www.sau.com.au/forums/topic/117456-boost-issue/#findComment-2164782
Share on other sites

its probably your coil packs. its a common problem in the r33's.

take them out and get the coil packs cleaned on the inside with some steel wool till theyre all nice and shiney on the inside.

its either that or your spark plug gap is too big (although 1.1mm should be fine on standard boost).

thank you for advice :)

Link to comment
https://www.sau.com.au/forums/topic/117456-boost-issue/#findComment-2175498
Share on other sites

Time for a bit more info on this thing :thumbsup: I didn't write a post up about it yet because the car needs to be repaired first (the accident or should I say incident was not her fault in the slightest, long story which I won't go into here). Anyway here's the basic rundown and why I don't think it's the coils.

Firstly, the old coils were good up until about 1 bar of boost, then it would get the misfiring problem at anything higher which I discovered when I had it tuned last year. So I got Splitfire coils which fixed it. Before selling the car I decided to put it back to stock(ish), but tested the old coils at 1 bar first, to make sure that they were still ok. Everything was fine.

So then I put the rest of the stuff I was selling back to stock. Injectors, ECU, AFM. Then I noticed that it was getting the misfire problem again, at about 5000rpm as seems to be the norm. Luckily I still had the Splitfires so I threw them back in to see if that helped, and it didn't make even a slight difference. So I was and still am 99% sure that it's not the coils.

Next thing to test was the AFM. I couldn't put the Q45 AFM and PowerFC back in because they had been sent to their new owners already, but luckily Andrew from Kudos Motorsports sent me a stock replacement express post (thanks Andrew!), and this seemed to make a difference. Instead of misfiring ALL the time, it was now doing it maybe half the time and seemed to be improving. I then decided it was the factory AFM making it run too rich and fouling the plugs, but now with the new AFM it was running correctly and blasting off the carbon.

At this point I decide to put the car on the market, but Emma gets a new job and says she can afford to buy it, so she is driving it around herself for a couple of weeks before she has the incident mentioned above. During that time though we discovered that the misfiring problem was gradually returning. I found that I could lessen the effect by winding the boost down, but gradually it started happening at lower and lower boost. Even though the EBC was set to 0.6, I think that the adjustable wastegate actuator is set to around 0.8 so I don't think we've managed to drop it any lower than that. I would need to road test it to check but obviously that's not possible yet.

Other things I've tried were changing the plugs to new ones, it didn't make any difference and the old ones weren't fouled anyway so now I have a spare set. My current theory is that it's factory boost cut, but I unfortunately don't have a PowerFC anymore to test this theory. The turbo is not stock, it's a 450hp Garrett so this would generate extra problems for the factory ECU. The fact that the misfiring issue is moving around depending mostly on the changing of air flow (boost) or measuring it (AFM) makes me think that the ECU is "learning" how to cut the boost again whenever I change something, similar to how it learns how to idle, and back off timing when it detects detonation. A simple test will be to reset the ECU once it's on the road and see if it improves anything.

I think that's the whole story! I was going to post all this up after the car was back on the road, but Emma's very eager to learn and she thought she'd put the post up about it :P

Link to comment
https://www.sau.com.au/forums/topic/117456-boost-issue/#findComment-2175810
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm hoping I just don't have to do an engine rebuild NOW. Doesn't mean I won't do it at some point. I think a plus point is that the car presumably ran on or close to stock power nearly all it's life so far. Only the Owner I bought it from actually increased power with a standalone ECU and blew the OEM turbos. And after it got thee 2860s it wasn't driven an awful lot either.   That is what I meant. With the twins coming on so late (4500-5000rpm) I hope the rods won't want to exit the block prematurely. And it still being a 26 means the torque curve isn't gonna hike up all that much.   It didn't blow up on the dyno when they tuned it to 500ish crank. So I suppose it'll be okay for now. They did put a Tomei head gasket on first though which did not seal at all, and they redid it with a Cometic one. Which I hope won't be my water leak.   Mainly anything oil. So far all it has is the N1 pump, oil restrictor and a filter relocation kit with a cooler.
    • 15000? ish? Something like that anyway. It wasn;t so much a wear as a tear that then spread. Might have lasted a lot longer if not bothered by just one incident, whatever it was. I took a punt. They are really comfortable and do a good job of holding. My daughter HATED it when I first put them in, and probably still does now. She has sensory issues and hates the way they are all up your business. I'm 197cm and 95kg. Not fat or particularly wide, and the XL size seat is the rigth fit. If I was any fatter it would start to get too snug. Any skinnier and you'd possibly want the smaller width.
    • Mrs rs focus came factory with recaro cs  sportsters in it and they a pain in the ass to get in and out of with the really high bolsters, once you were in them they were one of the most comfortable seats I have ever sat in
    • The NA 2.5 has very little torque. You won't feel much. Those trannies are also a million years old now and it could well be f**ked. First generation electronically controlled autos will often refuse to kick down, ete, etc, depending on what's wrong with them.
    • Yes, but no but yes but no. Those "it's fine up to 500HP" rules and everything else like it were all determined back when the cars were 10 years old. As they are now 30 years old.....what do you reckon the chances of something shitting the bed are? I'd say they are much higher now than they used to be. You might be lucky. You might be unlucky. Spin the wheel and find out. Yeah, nah. It's actually exactly the opposite. Making boost early and having heaps of torque able to be generated right in the middle of the rev range will do more to damage an engine than having to rev it high to make the power. Think about the load on the conrods, bearings, etc, to make 400HP at 4000 rpm, vs 400 HP at 6500 rpm. So someone has already "let the Nissan out" which is how we describe the increased chance of a fiddled with engine to have had something done wrongly. Many more engines that have been opened die than stock ones do - even if you into consideration how they are treated wrt power levels and the like. Again, not saying that yours will definitely have been put back together by a moron. But the possibility does exist. It's still a lottery. Spin the wheel. What weakspots?
×
×
  • Create New...