Jump to content
SAU Community

Recommended Posts

I need help .... i need to know what needs to be done to my car before i put a better turbo on my car. I have a front mount 3 inch turbo back zorst and pod. everything else is stock. im interested in putting a better turbo,

also i need to know what turbo to get i dont want to spend big bux and dont want huge power. i know of a few people putting highflowed 33 or 34 turbos on there r32's. are these reasonable turbos i should look for.

What i am looking for is a little bit more power but most of all relyability.

thanks for your help

sorry i dont know much ..

Link to comment
https://www.sau.com.au/forums/topic/117480-better-turbo-for-r32-gtst/
Share on other sites

based on my experience, anything more than the stock turbo requires a fuel pump

i can recommend an rb25 turbo and the only extra thing you will need is a fuel pump (as mentioned) and that will work with the stock ecu nicely

this will also maintain reliability

you might want to also consider a boost controller..

cheers,

Warren

R34 turbo would be better again, but a lot harder to come by and more expensive.

If you go and R33 turbo, you want to get it from a series 2 as they have a nylon compressor wheel and are rated at 180-190 odd rwkw.

I have an R34 turbo on the way for mine, can't wait!

I have a bosch 040 fuel pump and a remapped ECU, I also have 3" dump back, POD filter, EBC and front mount... will get it retuned once I fit my GTR injectors and Z32 AFM.

R34 turbo would be better again, but a lot harder to come by and more expensive.

If you go and R33 turbo, you want to get it from a series 2 as they have a nylon compressor wheel and are rated at 180-190 odd rwkw.

I have an R34 turbo on the way for mine, can't wait!

I have a bosch 040 fuel pump and a remapped ECU, I also have 3" dump back, POD filter, EBC and front mount... will get it retuned once I fit my GTR injectors and Z32 AFM.

What rw/kw you expecting with that type of set up and if you dont mind me asking what would it roughly cost.

What rw/kw you expecting with that type of set up and if you dont mind me asking what would it roughly cost.

I managed to get mine for $530 shipped... But I have been looking for about 6 months!

I am aiming for a very responsive 200rwkw! Should be quite acheveable, just got replace the dump and cat I rekon.

Edited by CATKICKER

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. So one of my major issues at the moment is my rear turbo leaking oil on the exhaust (and the general area). I presumed it was the rock hard super old drain hose, which it was not. So now I am in the midst of removing the rear turbo to get access to the banjo bolt that goes into the turbo oil feed. As one of the previous owners accidentally? tore off the OEM oil feed hardline that reaches behind the turbo, they ran braided lines directly to the turbo, presumably PTFE. Now, regardless if the line has rubber or teflon inside, is it just generally a bad idea to do this? I imagine these lines get quite hot being between the engine, turbo core and exhaust manifold. I suppose it's not too far fetched to think the line may even have melted. I'd love to hear your opinions on this as as the replacement OEM hardline piece is 130 per unit. And cutting open the currently mounted line to see inside will mean I just have to get a replacement either way. So far I am hoping maybe the bolt just loosened or (god forbid) they forgot one of the crush washers.
    • If it's a factory 20de manual probably has the 6 bolt flywheel in which case the det clutches won't work as they're 9 bolt.
    • All RB push clutches are interchangeable. AFAIK, the 4cyl ones are not. Different flywheels. The RB small box is not identical to the 4cyl boxes. Just very similar.
    • Hi. I need a new clutch for my gearbox. It is a factory smallbox behind RB20DE NEO. What options do i have? If iam not mistaken the gearbox should be the same as in R32 GTST and Nissan S14/S15? I found some Xtreme Clutch Stage 1 for S14/S14 (i dont know if you know the brand) (UK) OR...is the clutch same as in the bigbox from RB25DET?   Thank you!  
    • Listening to an artist called "the flashbulb". Not bad. Makes some fairly well researched youtube vids in various things.
×
×
  • Create New...