Jump to content
SAU Community

Fs - Modified 2001 S15 - Sydney, $34,000


Recommended Posts

Specs:

- Garrett 3037 ball bearing turbo

- Greddy plenum

- Greddy triple core drag S15 radiator kit.

- Craig Davies 16inch thermo fan

- HKS Type R Drag Intercooler

- 38mm Turbosmart wastegate

- Customised Race Pace stainless piping throughout turbo/intercooler setup

- K&N Air filter

- HKS Hi Power 3inch Cat back exhaust

- NISMO 750CC INJECTORS

- Bosch 044 external fuel pump

- XTR custom surge tank

- Sard fuel reg

- CUSCO 1.5 way LSD -

- Project mU slotted & drilled discs

- BREMBO R33 V-SPEC calipers.

- CUSCO BRAKE CYLINDER BRACE

- CUSCO FRONT STRUT BRACE

- CUSCO REAR STRUT BRACE

- JIC MAGIC FULLY ADJ COIL OVERS

- NISMO REAR ARM ASSEMBLY

- upper & lower links

- C's short shift kit

- Micro tech LTX8

- Bosch individual coil packs

- 18INCH VOLK RACING CHALLENGES in rare diamond black

- D-SPEED WIDE BODY FLARED/GILLED FRONT GUARDS

- CWEST Spec 2 FULL BODY KIT

- NISMO CLEAR INDICATORS

- NISMO PETROL CAP

- NISMO RADIATOR CAP

Located in North Sydney

11 Months Rego in New South Wales

No accidents

Slight damage around front drivers side 1/4 where wheel hits the lip

No offers

No trades

No time wasters

Pics

1159617.jpg

1159620.jpg

Will take more if asked.

Link to comment
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Well I had 2 choices from then on. I either had to (reluctantly) move it on to another potential buyer and take the loss on the chin. Or I stick with it and turn it into a restoration project. I chose the latter. Project Snowstorm began! The frp body kit was the first thing to go. Turns out the original colour used to be silver. The Neo and gearbox were removed, along with the prop and exhaust system before it took a trip to the bodyshop, where I wouldn’t see it again for quite some time due to the pandemic hitting very soon after they took it away. Eventually, progress began and damage assessments made. Even the front chassis leg was in pretty bad shape!     Then the chopping commenced. For these guys it was just usual routine, to me it looked absolutely terrifying!   More to follow as I’m struggling to focus on my screen at 12:45 am!!!
    • That's the most absurd thing I've ever heard. I would go cut bellhousing over that monstrosity of a flywheel all day, every day. It puts a lot more mass further from the last main bearing. I've had nothing but problems with Collins in the past and refuse to ever buy their products again. I would not trust anything they tell you. He's playing his salesman card.  I'm currently at 640whp on a mustang dyno (~770bhp) with the intentions of running E85 and a lot more power this upcoming spring. Cheers, 
    • Nah, it's not the reduced knock margin. It is a direct mechanical effect of having to initiate the combustion earlier, while the piston is still rising, which starts to exert combustion pressure on the rising piston earlier, making the rest of the engine work harder to finish driving the piston up to TDC where the combustion pressure stops being a negative and starts being a positive. Your modern engine that only needs ~10° to make MBT doesn't waste the other 10 or so degrees of crank rotation. That's almost all of it. The difference in knock margin might go either way. Remember that modern engines to which you are currently comparing the long tractor engine (the RB) are now running super high compression, direct injection, tricky cam control and maybe even cylinder pressure sensors. You're not comparing apples with other fruit. It's apples and sea weed, or some other evolutionarily primitive vegetation. And remember, squish only really comes into play at the very end of the stroke. It certainly does good things, but it is not the biggest contributor to what's going on. It is quite possibly much less important in 4 valve head than 2 valvers also, because there is so much less squish available to a 4 valve anyway.
    • Food for thought, a longer stroke motor would need less ignition timing vs. a shorter stroke motor requiring more ignition timing.
    • Thanks Duncan, HART is only 10 mins from me (I did my bike license there), it'd be awesome if it ran these types of things.  Sutton Road does look good and they take fewer cars than SMSP which is good.  Surely you have enough land to lay a few million tonnes of concrete and some sprinklers D? 
×
×
  • Create New...