Jump to content
SAU Community

Recommended Posts

gday just wanted to know if anybody knew what lsd fits the oz delivered r30 hatch??? any info would help cheers :thumbsup:

R180 & R200 Long Nose Mechanical LSD's.

The R180 you might get from the front 720 4WD Ute, the R200 is the best but is also the hardest to get.

You need the half shafts as well with the R200 as it's bigger in dia, hence the shafts are shorter AND thicker.

Good luck on finding an R200 to suit.

The R200 from S13/R32 does not fit or suit.

Cheers, D

Link to comment
https://www.sau.com.au/forums/topic/117952-lsds/#findComment-2169535
Share on other sites

  • 2 weeks later...

I belive that the front LSD R180 Diff in 720's were a factory option, as were the rear Lsd H190 diffs.

They are hard to find, Possibly harder than a R200 LSD.

There are aftermarket/Nismo Lsd eqquiped R180's, but these usually sell between 1k to 2k depending if its be rebuilt and what gear ratio.

(Im still trying my luck on getting a reasonably priced one for my 1600).

Hope this helps.

Cheers,

Dan.

Link to comment
https://www.sau.com.au/forums/topic/117952-lsds/#findComment-2211648
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don’t really have any ideas how to set the timing on the CAS 😂, sounds like the top, sounds like it maybe misfiring as well as ticking,  got the box sorted 😌, must of been a air bubble on the clutch side
    • Use a 2' length of hose (that's 2 foot, not 2 inches) as a stethoscope to localise the source of the ticking. From cam covers? From exhaust or turbo manifold gasket? From injectors? From lower down in the engine? Etc. Use a timing light to set the timing. Put Redline Lightweight Shockproof in the box. It's not the very best thing for the box, but it will take a box that refuses to engage a gear with other oil, and make it engage a gear. I had to put it in when I installed the R33 box I have in my car. It would not select ANY gear when running. Smurf jizz made it work. That was >10 years ago and I still use it. I'm stuck with it now. Failing that - rebuild the box.
    • Well done Duncan. The fuel tank bulkhead lid is also in great condition (some of mine were stuffed). These are now out of production and good ones like that are becoming hard to come by.
    • Wow that's a steal, you've done well there. 
    • Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
×
×
  • Create New...