Jump to content
SAU Community

Wanted: R33 Gtr - Sorted Out


Recommended Posts

ASX-hoon... everyone else has cleaned up their verbage, except you. I'd offer you up bank details on my last x-fer to prove you can get exchange rates better than posted... but you're just not a nice guy. $100K+ you can get a significant increase, $10K+ some; no, not alot of money for a mid-6-figure earner, O&G industry.

This will be my last post responding to you unless you "get nice"... have the last word if that's your thing.

I think you better start selling currency here, i can get you a few customers if you think you can do better than the banks/ foreign currency dealers. You will make a killing and then you may even be able to afford that "well sorted 33".

As for me "get nice", i will but only when you ankowledge that your 86=$ was just out of your hat, old exchange rates. When i say something i can always back it up with facts not fiction or bullshit, i leave that for you.

I dont know how many times you have exchanged $ to JPY or other foreing currency, i have done it plenty of times and i never got the true rate. Like i said before the banks want to make a profit, how do you think they will do that if they sell currency for more than they pay for it.

If you ever go to japan make sure you dont exchange AUD=JPY there, then you realy find out what profit is all about, their spread there is like 10%.

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

This thread is a right laugh, Keep it up guys entertaining read at work. And for the record 32 GTRs decent ones are around the price your suggesting so I dunno where your going to get a 33 from at that price.

Chris

Drove the car, hard... so he was genuine about accepting my offer. And, I was I the market.

I don't go in to waste dealer's time... like you obviously did with the F430. I'm sure he's making his 20%+/-, as most dealers look for... and you don't drive the car if your offer is a joke.

Point is, guys, teh guy at Street Machines likely paid about $25k for that car, listed at $35K.... willing to accept $32K. That's what my post is all about... getting the same deal a dealer gets from a guy needing cash now.

ENOUGH ALREADY FAST CANUCK !!!!

These guys have offered you their knowledge from experience accumulated over many years of owning, buying & selling GTR's & dealing with foreign exchange rates, they are not pulling figures out of their hats, they are giving you honest, realistic information yet you have chosen to contradict almost every person offering you advice.

You seem to think you know everything there is to know about buying a GTR, what a dealers profit margin is and accurate foreign currency exchange rates?

You say you want a car that hasn't been driven hard, yet you yourself admit to driving a car hard on a test drive. How many more 'prospective' buyers do you think have driven this car hard too. Most responsible dealers would never let somebody thrash a car that is for sale on a test drive, I know I certainly won't regardless of whether I thought the test driver was going to buy it or not.

So, you drove the car hard, it has 3 inspections to back up it's condition and the dealer is willing to accept the offer you made.

I mean it's such a good deal, and by your calculations the dealer is making a whopping profit to boot.

GO BUY IT ALREADY!!!!

ENOUGH ALREADY FAST CANUCK !!!!

.

You seem to think you know everything there is to know about buying a GTR, what a dealers profit margin is and accurate foreign currency exchange rates?

Of course he knows everything, we are the iddiots that are trying to open his eyes.

He thinks that people buy a GTR to go shopping in, not to drive it hard and never take it to the track, they buy a corrolla to drive hard.

Of course he knows everything, we are the iddiots that are trying to open his eyes.

He thinks that people buy a GTR to go shopping in, not to drive it hard and never take it to the track, they buy a corrolla to drive hard.

LOL :O

Do you think he's related to that other guy in Qld that was looking for a grade 4.5, 20,000 Klm, side airbag R34 GTR for $60,000?

LOL :O

Do you think he's related to that other guy in Qld that was looking for a grade 4.5, 20,000 Klm, side airbag R34 GTR for $60,000?

He is still looking i would say......

Someone i know bought a 2000 34 GTR ( no side airbags) , he paid 5 million Yen at auction + fob, you do the sums and see how much it cost him to land and comply.

He is still looking i would say......

Someone i know bought a 2000 34 GTR ( no side airbags) , he paid 5 million Yen at auction + fob, you do the sums and see how much it cost him to land and comply.

I know that someone as well, i think the misconception of people making 10K on a car is still out there. This could have been the case when the R33's were introduced to Aus, but its been over 10 years now, every tom,dick & harry can import a car and make their 1-2K profit. I guess the only way to find out is if they approach a broker and get them to bid on some cars and see what they sell for.

I go shopping in the GTR :O cos I can. Plus with the wrecked back the GTR seats were preferrable, and the Recaros more so as I can throw it around on the way. Need to practice for DECA somehow and it is really only a parking lot battle. Also the curvy Chicks in Epping just loves you with fully sick cars.

It's nice to see Norm's slight tempering in the attitude, but I've seen engineers like him before. Go in hard with half the facts and no experience, make a few minor concessions when called out then deliver a bucket of poo leaving guys like me to recover or close a half billion $ project. I hope you prove me wrong here. Not that this an expensive acquisition unless you get confused over value vs cost.

Now look Norm, I'll be honest with you. You have an audience here with vast experience in these vehicles. [/Add selfless personal plug] I myself am quantifying for the forum the major failures and their principal causes in the engines we run, with help from the less fortunate members. With a need to build a solid race engine (I do my own builds in my garage) I purposely set out to discover the limits of an RB25 with the usual suite of shortcuts because short of destruction, failure was my goal. I then documented what I'd done. This is the sort of people we are, and we welcome like minded enthusiasts. A vital few (PranK, Merli, Blitz to name just a few) offer their time to manage and moderate the rest of this unruly herd. You see how we respond to overenthusiastic types who are instant experts. If you have something to offer, great, but we already have a pretty good wheel.

While your goal is well laid out, it's your lack of ability to demonstrate flexibility that is of concern, plus your failure to realise that setting such rigid outcomes increases your probability of catastrophic project failure. Sure you have a GTR, but can it be driven? You might as well waste the money on the Audi.

I mentioned before value vs cost. You may think that with a low cost car you will get good value. Not true (mostly, ok I did but I was just lucky to be half looking and had the cash and the owner was not in real need of cash, just a desire for something new). By saving even 5K on the market average I would expect you to pay 3 times that in repair costs, minimum. An engine alone will cost 9-10K if you can't do it yourself, tow in drive out, bare minimum without turbo getting attention.

The guys offering advice know the list prices at the cheapest suppliers for all the parts off the tops of their heads. Then there is quality machining and building as the parts are useless on their own, then if you are going to track it, what about oil starvation or turbine failure and ingestion phenomena. Most workshops claim to know all about Skylines but the nuances are so minor for significant outcomes that there are few mechanics with the knowledge. Just a single lazy mechanic replacing the front idler bolt with a 5.5 instead of 8.8 or better will destroy the top end in 2000km.

Paying top dollar won't guarantee a solid outcome either, but you look for subtleties like who rebuilt the engine last time. Racepace (Melb), Croydon(Sydney), ProEngines(ACT) for a start. There are others but it takes time to discover what they offer, and that is the fun of being on here. Learning from guys who don't even recognise there is a box to think outside of. At least 2 of those mentioned participate on here, for our benefit. I regularly feel humbled by the specific knowledge some of the guys on here have, such as turbo details. I CBF learning beyond the bare basics. Sure I have the knowledge to design one but the off the shelf parts are a massive choice and variety.

Now you won't get an unthrashed GTR cheap. I give mine a hiding now and again, and then love it to death later. It is just unreasonable to think someone else would cherish and baby one after sorting it out just for your benefit. Would you do that? Just not a reasonable thought process to attempt to validate. You may just be lucky but statistically improbable.

Be prepared to buy cheap and repair, or buy well sorted and enjoy with the price that comes with that. In 12 months, oils aside I've had to replace a rubber IC hose and a roof light bulb. Plus a front right side shaft needs replacing with a reco jobbie as the boot is just now splitting. I have a sickness. I regularly put a car on the stands and do a check underneath for an hour or so, fixing what is needed.

You asked the question below.

Any advice about the "major" GTR flaw/flog I should look for? ermm.gif

About the only thing is fluid leaks, compression test/leakdown and clunks in the driveline. The rest can be just pure luck. You will never know if the turbos are about to kill your engine. If the car has steel turbines, good chance it's already a good choice, but you're already paying extra.

Final advice, add 5-7K to your goal and be flexible when you see the right car. The joy of the ride continues long after the price tag is forgotten. Oh and don't turn into the next Mines_Datsun, a former member of great fame and ...well you can search and read.

One other note. A GTR is so nice to own and drive that only the desperate or clinically insane will drop the price to get rid of it quick, and they will generally not be well sorted but thrashed with a multitude of problems.

Jst Letting Everyone Know....Not On Anyones Side - But In Trading Post Last Week...33 GTR For 25K Neg???Not Sure On Condition etc, But It Was There?

Gd Luck Trying To Find Something Anyway

My wife reckons I should buy broken ones and do reno's on them.....Hmmm.

Someone i know bought a 2000 34 GTR ( no side airbags) , he paid 5 million Yen at auction + fob, you do the sums and see how much it cost him to land and comply.

Specialising in Skylines, I have imported numerous R33 & R34 GTR's over the last 9 years, I know exactly what costs are involved. I've done the sums so often. That's why I get so annoyed when people like Fast Canuck post prices for cars he obviously knows absolutely nothing about.

I have daily records of selling prices for all models of GTR's in Japan - good grade and low grade.

I can categorically say beyond any doubt that it is impossible to import/comply & sell on a retail level a good grade (well sorted), genuine kilometre R33 GTR V Spec for under AUS$45,000.

A good grade R33 GTR V SPEC will cost you between 1,800,000 - 2,400,000 yen in Japan.

Fast Canuck should find this information helpful but I have a feeling it's not what he wants to hear, nut I went to the trouble anyway.

Below is actual data from auctions in Japan on recently sold R33 GTR's.

Some are V Spec, some are Non V Spec, some are high klms, some are low klms, some are accident damage.

Year Model Model Type Trans Odometer Colour Grade Sold Price

1995 SKYLINE 2D 4WD GT-R Manual 5 Speed 35,000km white 3 1,944,000YEN

1995 SKYLINE - Manual 5 Speed 43,000km white 4 1,715,000YEN

1995 SKYLINE 2D 4WD GT-R V-SPEC Manual 5 Speed 45,000km white 3.5 1,775,000YEN

1995 SKYLINE - Manual 5 Speed 59,000km purple 4.5 1,789,000YEN

1995 SKYLINE GTR V-SPECIAL Manual 5 Speed 86,000km white 4 1,715,000YEN

1996 SKYLINE 2D 4WD GT-R Manual 5 Speed 10,000km silver 4A 2,048,000YEN

1996 SKYLINE 2D 4WD GT-R V-SPEC Manual 5 Speed 23,000km blue 4A 2,534,000YEN

1996 SKYLINE 2D GTR Manual 5 Speed 24,000km white 5 2,208,000YEN

1996 SKYLINE 2D 4WD GT-R V-SPEC Manual 5 Speed 31,000km white 4 2,737,000YEN

1996 SKYLINE - Manual 5 Speed 33,000km silver 4 2,185,000YEN

1996 SKYLINE 2D 4WD GT-R Manual 5 Speed 33,000km black 4A 2,382,000YEN

1996 SKYLINE 2D 4WD GT-R Manual 5 Speed 42,000km silver 20P 1,730,000YEN

1996 SKYLINE GTR Manual 5 Speed 42,000km silver 4.5 1,949,000YEN

1996 SKYLINE 2D 4WD GT-R Manual 5 Speed 46,000km white A 1,730,000YEN

1996 SKYLINE 2D 4WD GT-R Manual 5 Speed 54,000km purple 4 1,900,000YEN

1996 SKYLINE 2D 4WD GT-R V-SPEC Manual 5 Speed 56,000km white 4.5 2,100,000YEN

1996 SKYLINE - Manual 5 Speed 57,000km blue 25P 1,972,000YEN

1996 SKYLINE 2D 4WD GT-R Manual 5 Speed 60,000km black 4 1,735,000YEN

1996 SKYLINE - Manual 5 Speed 65,000km white 4 1,718,000YEN

1996 SKYLINE - Manual 5 Speed 70,000km white 4.5 1,714,000YEN

1997 SKYLINE - Manual 5 Speed 20,000km silver 3.5 2,610,000YEN

1997 SKYLINE - Manual 5 Speed 25,000km gunmetallic 4 2,600,000YEN

1997 SKYLINE - Manual 5 Speed 29,000km white 4 2,470,000YEN

1997 SKYLINE 2D 4WD GT-R Manual 5 Speed 67,000km white 4 1,990,000YEN

1997 SKYLINE 2D 4WD GT-R Manual 5 Speed 70,000km white 4 1,810,000YEN

1997 SKYLINE 2D 4WD GT-R Manual 5 Speed 87,000km white ±Ø 1,760,000YEN

1997 SKYLINE 2D 4WD GT-R Manual 5 Speed 87,000km white ±Ø 1,765,000YEN

Fast Canuck, do your sums, the above reference data shows what you should expect to pay for a "well sorted" R33 GTR.

Jst Letting Everyone Know....Not On Anyones Side - But In Trading Post Last Week...33 GTR For 25K Neg???Not Sure On Condition etc, But It Was There?

Gd Luck Trying To Find Something Anyway

That car was deregistered about 3 years ago, It has to have a full EPA. They have been trying to register it on and off since. She wont pass emissions, to much blow-by .

Thats the kind of car you will buy for $25 k .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks, I removed the fuse and the relay from the car and made my own circuit with them to test them with a test bulb.  I will look for the wiring diagram and go from there.
    • Jdm DC2R is also nice for a FF car compared to the regular hatches of the time.
    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
×
×
  • Create New...