Jump to content
SAU Community

Recommended Posts

I have a Cefiro, that has had a 5 Speed manual conversion... Still an RB20DET engine.

I'm trying to figure out what gearbox it has, eg: R32GTS(-T -R), R33 GTS(-T)? My question is there anyway to identify which type of car each specific gearbox came from from the above example? EG: model/part number on the gearbox or similar...???? Clutch may need replacement so, kinda need to know :P

Kind Regards.

Link to comment
https://www.sau.com.au/forums/topic/118104-identifying-codes-on-gearbox/
Share on other sites

for r31/r32/a31/z31 rb20 boxes, RP71C is the model and next to that is either #1 or #2 which denote either single or double syncros, generally double syncros are only in the turbo variants... the ribs on the gearbox casings I have found don't always match if its a turbo or not as I've pulled a few ribbed boxes from N/A vl commodores and they look identical to an import turbo box, but they arent the same.

easiest give away with your car quikblade, would be to check the box cross member, pretty sure an a31 manual cross member will bolt straight up to the body of and a31 auto cefiro, if its got a modified crossmember then its likely its a 25 box cos they're longer (just) than the 20 box!

Edited by frigjam
the box on the right is a r32 gtst/gts25de box (better than normal de box)

you can tell its the turbo box due to the amount of ribbing on the box (others dont have half as much) and the red hose on top

out of curiosity what is the red hose? :noob:

The easies way to tell the difference between an RB20 and RB25 gearboxes (assuming the 25 box is of a turbo origin) is pop your head under the the drivers side and have a look at your clutch slave cylinders.

RB20DE(T) & RB25DE

18.jpg

RB25DET

29.jpg

  • 4 weeks later...

The filler plug is on the passenger’s side of the box. From memory you will need 17 or a 19mm spanner. Unless you have an oil pump you will have to run a hose and funnel setup from under the bonnet to the hole. You'll need two people, one to hold the hose, the other to pure the oil in.

I hope that makes sense.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
    • Re read everything that has been written about this in this thread.. Let us know if you're still confused.
    • This would be a new pump with new gears. I'm just unclear on whether it's a good idea to run more oil pump flow if you don't actually need said flow. Oil level is set a minute or so after shutting off a warm engine so wouldn't the high RPM oil level in the sump end up lower all things equal? Plan is OEM clearances, main concern in my mind is whether the OEM pump can keep up with the flow requirements of any additional oil coolers.
×
×
  • Create New...