Jump to content
SAU Community

Recommended Posts

Sorry i couldn't seem the find the answer in the FAQ's

Basically i am after a set of Stock Stagea rims the 16x7? 40 offset rims to cover r33 gts m spec brakes

The mesh style is the type that i seen on the cars and i am wondering if there the same internally diameter dimensions as say a r33gts rim , or a r33gtr rims clearance wise .

conversionirs0051lr.th.jpg

stock r33gts rim with the r33 gts brake caliper

Thanks

Adam

Standard Stagea S1 rims won't fit on the front of R33GTST's, the spokes hit on the callipers. They fit on the rear OK though. I tried it last week for the drags, as we have the MT ET Street radials for the rear mounted on the Stagea rims.

:D cheers :P

Sydneykid

Would you say that say 5mm spacer would fix that problem ? I am using s13 struts with s14hubs and for the r32gtr rims to clear the strut i have had to machine a bolt on hub spacer of 20mm . So there is 20mm extra caliper spacing over the caliper from standard due to all the r32 rims being for a wishbone front end .

Goldzilla

Yes that is a gts wheel on a ae86 . The front brakes used to be sr20det 280mm ones for many years , but since going to very modified s13 multi link rear i have decided to convert all the brakes and stud pattern to 5x114.3 to make finding rims easier . Finding 7.5 - 8 inch rims in 30-40 offset in 4x114.3 is next to impossable now . Is basically a 86 body now there isn't much left thats not nissan or from some other make.

enignebay8kp.th.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • AFM looks to be a z32 The injectors maybe old Nismo 555cc The turbo tag when looked up seems to be a gt2871 , imagine it would have the bigger rear housing .82 all look like the mid 00's mods when he started building it up. Vac hose seems right but would need to see a diagram. Great work going up there and sorting it out, be a good club car for someone wanting a good reliable rig.  I know I would like to have it but no space and too many other race cars at the moment.
    • Heys guys I got a r32 gtst speedo is out by 10kph seems the faster I go the more it be out  just seeing if anyone else had to problem and knows how to fix it 
    • I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • 2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
×
×
  • Create New...