Jump to content
SAU Community

Recommended Posts

I found that even after getting an aftermarkit BOV, if you still have your old on hooked up or just bloked off, it CAN STILL LEAK

I have made got plates made up from 3mm alloy to plumb off the stock BOV , so it cant leak or Release air.

I found after doing this it made my turbo smart BOV louder and more responsive!

The plate is the exact size, and will bolt traight onto were old stock BOV was.

no mods needed, unbolt stock bov clean off were it sat, then place plate seal side down and put ya bolts in and tighten.. too easy!

They have been painted in heat proof black, and have a sealing pad for extra protection!

I have about 12 made and ready to bolt on.

$10 ...... thats it

this is how they look once on...

P5162557.jpg

P5162563.jpg

PM me for yours NOW, or call 0423320844 lol

these work for s2 r33?

They will work on a S2, I would recommend bolting the stock bov over the plate so it looks standard, will keep you out of trouble with the boys in blue!

these work for s2 r33?

YEAH MATE, THEY ARE THE SAME FOR r31 RB20DET RED TOP ALL THEY WAY TO THE wgn34.

They will work on a S2, I would recommend bolting the stock bov over the plate so it looks standard, will keep you out of trouble with the boys in blue!

YEAH YOU CAN BOLT THE STOCKO ONE OVER THE TOP, BUT I DIDNT LIKE HAVING THAT CRAP POS ON ANYMORE,LOL! I MADE THEM SO THEY WOULDNT LOOK OUT OF PLACE KINDA THING TO ATTRACT ATT!

HMMMM, MAYBE THEY SHOULD GO A SILVER COLOUR? TO BLEND IN MORE..

wat power tool did ur use to cut these out of the alloy? they look pro

I MADE THEM WITH AN INDUSTRIAL ROUTER AT WORK! YEAH I MADE THEM SO THEY LOOK VERY NICE, LIKE A PRO!

iF I CAN GET PEOPLE INTERESTED ILL MAKE THE KITS WITH NEW SS BOLTS AND ALL! BUT SEE HOW IT GOES

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...