Jump to content
SAU Community

Hi Flowing Injectors

warpz0r

By warpz0r,
in Engines & Forced Induction

 Share

Recommended Posts

SPOOLN Contributor

SPOOLN

Posted
Posted
Hi All,

Anyone know where i can get my rb25det injectors hi flowed to about 500cc?

any idea on price?

thanks

You may be better off buying top feed 14mm injectors and making a fuel rail to suit. Not that big of a job really if you have the tools available. I have heard bad things about high flowing injectors has anyone else?

HypeR33 Mentor

HypeR33

Posted
Posted
Hi All,

Anyone know where i can get my rb25det injectors hi flowed to about 500cc?

any idea on price?

thanks

Why not replace them? If you want around 500cc there are a lot of choice and they aren't hat expensive and they will drop straight in...maybe needing collars if you go for the sards.

Nengun sell all brands delivered to your door -

HKS 550cc $158 ea

Sard 550cc $710 all up

Nismo 555cc $161 ea.

Not sure what the price would be on the hi flowing of your stock injectors, but for the price difference and flow reliability I would be replacing them

Cheers

JB

HypeR33 Mentor

HypeR33

Posted
Posted
i would go for real injectors, but i dont have the money....

i remember reading somewhere that u can highflow your injectors for $50 each, which are flow tested and show that they are as they say...

As long as they are reliable then $50 each is a good price...check these threads out from others asking about high flowing previously.

Link 1

Link 2

Hope some of the info helps :D

Cheers

JB

Munna1 Proficient

Munna1

Posted
Posted
As long as they are reliable then $50 each is a good price...check these threads out from others asking about high flowing previously.

Link 1

Link 2

Hope some of the info helps :rofl:

Cheers

JB

Thoses threads still dont clear things up for me. Anyone using highflow injectors with a power fc if so what cc and how long have you been running them for.

cheers

Tangles Grand Master

Tangles

Posted
Posted
i would go for real injectors, but i dont have the money....

i remember reading somewhere that u can highflow your injectors for $50 each, which are flow tested and show that they are as they say...

Do a search - there is a known place in Melbourne that do it (AVE?? or something similar, cant quite remeber)... they flow them to 500-550cc, for around $450-$500 I believe

Sydneykid Grand Master

Sydneykid

Posted
Posted

There is a reason why high flowed side feed injectors are not all that common. It's cost comparison, they simply aren’t that good a value for money. Cleaning, high flowing and testing side feed injectors costs around $80 each, say $500 for a set of 6 including freight. You can buy a new set for ~$700, so it’s only a $200 saving. Which you can quickly recoup when you sell the car with the standard injectors in it and sell the aftermarket injectors for almost what you paid for them. Brand name aftermarket side feed injectors hold their value very well.

:thumbsup: cheers :)

PS; be careful with the SARD side feed injectors, they are actually designed for 1JZ/2JZ and therefore need adaptor collars to fit Nissans

Bunta Grand Master

Bunta

Posted
Posted
There is a reason why high flowed side feed injectors are not all that common. It's cost comparison, they simply aren’t that good a value for money. Cleaning, high flowing and testing side feed injectors costs around $80 each, say $500 for a set of 6 including freight. You can buy a new set for ~$700, so it’s only a $200 saving. Which you can quickly recoup when you sell the car with the standard injectors in it and sell the aftermarket injectors for almost what you paid for them. Brand name aftermarket side feed injectors hold their value very well.

:thumbsup: cheers :)

PS; be careful with the SARD side feed injectors, they are actually designed for 1JZ/2JZ and therefore need adaptor collars to fit Nissans

But are they any good SK??

I got a set really cheap, Now I am worried that they will cause issues :S

Fangz Collaborator

Fangz

Posted
Posted
got mine hi flowed by avo here in melbourne , it cost $370 for all six. had them in for 2 years now and ive got over 300rwkws. car idles fine and hasnt missed a beat since.theyve got a website.

what size did u flow them 2?

  • 2 weeks later...
Munna1 Proficient

Munna1

Posted
Posted
got mine hi flowed by avo here in melbourne , it cost $370 for all six. had them in for 2 years now and ive got over 300rwkws. car idles fine and hasnt missed a beat since.theyve got a website.

sounds good big carl certainly something to consittor if you are on a budget

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      GTR R34 Limp Mode

      By GTSBoy · Posted

      Has equal chance of cleaning an AFM and f**king an AFM. I think you can work out what happened. When the Hitachi ECU sees the AFM die and goes into the associated limp mode, then it will start and run just fine, because it ignores the AFM and just runs on idle maps that will do what it needs to get it going. But there is no proper load signal, so that's about all it can do. My suggestion? If you don't want to go full aftermaket ECU, then get some R35 GTR AFM cards and some housings to put them in, in the stock location, and Nistune the ECU. Better to do a good upgrade than just replace shitty 40 year old tech with the same 40 year old tech.
    • steven7270
      GTR R34 Limp Mode

      By steven7270 · Posted

      So my car was recently having trouble starting on initial crank, I would need to feather the gas for it to start up but besides that it would start and run fine. So I clicked the idle air control valve (with throttle body cleaner) and cleaned the MAF sensors (with MAF cleaner). The start up issue was fixed and now the car turns over without the assist of the throttle, but the car is in limp mode and wont rev past 2.5k RPM. From what I understand the IACV would not put the car in limp mode, so I am to believe it is the MAF sensors, but it was running fine before and now I cant get it out of limp mode. I cleaned the MAF made sure the o rings were seated properly. Made sure the cables were plugged in properly, the cables also both read the same voltage. Does anybody know why this is or what could be causing this or how to get it out of limp mode?
    • Dose Pipe Sutututu
      SAUNSW - Cruise - Albion Park Aviation Museum - 9th August

      By Dose Pipe Sutututu · Posted

      Ooo I might actually come and bring the kids, however will leave the shit box home and take the daily
    • PranK
      Rusty roof repair

      By PranK · Posted

      Thanks. Yeah I realised that there's no way I'd be able to cover the holes with the filler, it would just fall through. Thanks again @GTSBoy!
    • GTSBoy
      Rusty roof repair

      By GTSBoy · Posted

      That was the reason I asked. If you were going to be fully bodge spec, then that type of filler is the extreme bodge way to fill a large gap. But seeing as you're going to use glass sheet, I would only use that fibre reinforced filler if there are places that need a "bit more" after you've finished laying in the sheet. Which, ideally, you wouldn't. You might use a blob of it underneath the sheet, if you need to provide some support from under to keep the level of your sheet repair up as high as it needs to be, to minimise the amount of filler you need on top. Even though you're going bodge spec here, using glass instead of metal, the same rules apply wrt not having half inch deep filler on the top of the repair. Thick filler always ends up shitting the bed earlier than thin filler.
×
×
  • Create New...