Jump to content
SAU Community

Recommended Posts

  • Replies 98
  • Created
  • Last Reply

Top Posters In This Topic

Just rang nissan spares... they're $203.15 plus GST each trade price. Apparently both are in stock in Syd. Can have em delivered to the nearest Nissan dealership.

Retail is $216 plus GST. Big saving :)

hey bl4ck32, any joy with SA nissan on the seals yet? :)

thanks mate! :)

Yup, rang em this arvo, and i got the same as everyone else. I know i got the wrong guy too. Id have to go in there to speak to the guy. But this other nissan knob said $260 a set, or $230 for a bulk purchase of 5...whoopie.

Im going in there i reckon and make sure i get the right guy...always better to speak to them face to face, so i can hassle him some :)

sweet you are a legend. was $260 a set meaning just the one seal, or $260 a set (meaning one left, and one right)? Cause if it's the latter that is still pretty good.

thanks mate, there has been a delay where my car is being painted so i have a few more days up my sleave now to sort this one out.

sweet you are a legend. was $260 a set meaning just the one seal, or $260 a set (meaning one left, and one right)? Cause if it's the latter that is still pretty good.

thanks mate, there has been a delay where my car is being painted so i have a few more days up my sleave now to sort this one out.

Id put money on it being for the one side.

There are a few places in Adelaide that make rubber seals for cars, (like rare spares do for the old holdens) Im gunna try contact a few and see if we can get some made up, like the genuine nissan ones...

Edited by Bl4cK32
mmm maybe instead of making a 32 into a Beer R 324 you are making a 34 into a much more styling 342? :)

this sounds like something id do.

im picking up the window rubber kit tommorrow as theyre in from Japan. Took a week, maybe less, ill let you know what it comes with.

Just rang nissan spares... they're $203.15 plus GST each trade price. Apparently both are in stock in Syd. Can have em delivered to the nearest Nissan dealership.

Retail is $216 plus GST. Big saving :sweat:

he funky, i missed this post. that is the same price i got in sydney, $220 inc GST (trade). but thanks mate :) :)

Hey guys, Im in the process of completely rebuilding my R32 Gtr ground up. It was tidy before (possibly one of the best) but hey im fussy! Prolly like you baron! Anyway i've been told the front and rear glass on the skylines is capsulated, they say that it is very hard to remove without breaking the glass! On top of that ive heard that a genuine front windscreen is around $2000! I prefer to go with genuine nissan stuff but thats crazy! Anyone got any input on the whole glass breaking thing?? Im a little worried. I dont mind changing seals but glass is not an option.

Hey guys, Im in the process of completely rebuilding my R32 Gtr ground up. It was tidy before (possibly one of the best) but hey im fussy! Prolly like you baron! Anyway i've been told the front and rear glass on the skylines is capsulated, they say that it is very hard to remove without breaking the glass! On top of that ive heard that a genuine front windscreen is around $2000! I prefer to go with genuine nissan stuff but thats crazy! Anyone got any input on the whole glass breaking thing?? Im a little worried. I dont mind changing seals but glass is not an option.

well i just had the front screen, rear screen and both quarter windows removed. no breakages thankfully. the place that is painting my car have a specialist glass removing dude come in to do that though. he did mention that the actual rubber seals are glued to the screen?

I have so far spent probably near on $1K just on seals and shit. I used the front mould kit that Kris talked about. It's just the 3 outer moulds and costs $180 trade, $220 retail. I even was going to do gaskets for the goor handles (even thought you can only just see it) but they wont sell seperately, only as a set with a new handle and it's $90 each side and no stock so as i was out of time i just had to draw the line somewhere.

I think to do every seal and mould would be well over $2K probably even approaching $3K just for the parts. and assuming you have access to a trade account. I am trying to source some direct from japan though, so i will see how that goes, but it will be too late for my current build :wave:

well i've now got:

door rubber seals, both sides

front windscreen mould kit

front screen seal kit

front screen locking seal kit

door window moulds/seals (finally)

rear windscreen mould kit (the $$$$$ one)

rear screen seal

rear windscreen locking seal

the only thing left is quarter windows (cant do) and door handle gaskets.

getting there....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
×
×
  • Create New...