Jump to content
SAU Community

Recommended Posts

hey guys got a question for yas.

if your car is stock height and you drive into a driveway and scrap the shit out of your front bar can you sue the council for the damage? or even if you arnt stock height but are still at the legal height of 100mm? :unsure:

Link to comment
https://www.sau.com.au/forums/topic/118571-got-a-question-for-yas/
Share on other sites

Why would you imagine the council would be liable for you driving your car in such a manner that it causes it to scrape against the driveway? If anything, they should sue you for damaging their driveway with your car...

Why would you imagine the council would be liable for you driving your car in such a manner that it causes it to scrape against the driveway? If anything, they should sue you for damaging their driveway with your car...

Yeah I totally agree. I don't think the council will pay for damage caused by an impact due to a drivewy lip being too high. In the same way they won't pay for damage to your car caused by an impact due to the posted speed limit being too high.

yeah, i dotn think ur gonna get much support on here, not to sound harsh, its just reality. where was the driveway anyway? is there any rule as to the angle on a driveway? coz it would make sense that any legal height car should be able to get up any driveway, within limits of course... not EVERY car and EVERY driveway, but i know alot of cars that scrape, and aint even that low

e.g. a stock skyline drivin through an intersection (not a driveway, but still...) at well below the speed limit scapes coz the road has a big mound in it, and on the dip on the other side, hits the groud with sum force. and this was on a main road crossing the princess highway

edit - i am aware the overhang is just as important as ride height, so i dont expect every car to get in every driveway, but most should be able too

Edited by VB-

From a legal point of view, the council are pretty well sewn-up. That's not to say that they're above the law, but you would need a tightly strung case to get them to concede anything.

I know a case that ran against a Metropolitan council a few years back. It ended up running for years, and racked up millions in legal fees. Eventually, the council lost the case, and was ordered to pay costs...

Needless to say, the residents of that council district STILL have a levy in their council rates to make up for the fees paid by the council for losing.

my parents built a house in a develpoment a couple of years ago, and for some f**king stupid reason there was a traffic island built right across the driveway. and the house was on the right side of the road and the end of the street was a dead end, so you either had to drive over the island or go to the end of the street and do a 10 point turn (due to lack of parking everyone parks ther cars in the street)

told the developers, they came and shortened the island, so now you can get in, but only just. easier to just drive on the wrong side of the road

  • 4 weeks later...

just checking gee wizz just a question! i know a girl who stepped in a pot hole on a foot path and broke her ankle and got 12 grand from the council for there poorly maintained foot path. but you cant get anything for damage to your car for a poorly maintained road?

And for those of you saying i should be sued for daqmage to their driveway and that i should learn how to drive, im not an idiot i mount it on an angle.

why is the legal height 100mm? is it to protect the roads, speed bumps and driveways? or is it to prevent damage to your car?

if vic roads build roads and streets and have a rule of 100mm and i stick to that rule and their road damages my car i should get compensated.

im not saying i will and i know ive got no hope getting it. but i thought fellow car enthusiasts would agree. makes sense to me.

obviously im careful not to damage my car but hey shit happens and when it does its because of crappy roads streets and driveways.

just checking gee wizz just a question! i know a girl who stepped in a pot hole on a foot path and broke her ankle and got 12 grand from the council for there poorly maintained foot path.

Thats a whole nuther kettle of fish.

The 100mm rule would be in effect, to prevent you from bottoming out over every dip and bump in the road. Bottoming out can be dangerous, as in extreme circumstances it could cause one or more tyres to lose contact with the road, hense the potential to lose control. 100mm would be the figure decided on, that would prevent you from bottoming out on anything other than the most extreme conditions.

By the way, I have seen plenty of stock cars scrape on some driveways.

Edited by Thunderbolt

Ok lets angle this question from another angle...as we all know to repair a cracked front bar is relatively cheap.

eg

John smith driving down the road in his r34 vspec II and hits a pot hole damaging one of 4000 dollar rims!

What do you think would be the outcome under these circumstances?

From a legal point of view, the council are pretty well sewn-up. That's not to say that they're above the law, but you would need a tightly strung case to get them to concede anything.

I know a case that ran against a Metropolitan council a few years back. It ended up running for years, and racked up millions in legal fees. Eventually, the council lost the case, and was ordered to pay costs...

Needless to say, the residents of that council district STILL have a levy in their council rates to make up for the fees paid by the council for losing.

This brings forward the question, is the counsil hated by its residents for continuing to persuse the case. Or is the resident that sued hated by all for the higher rates ;)

hey guys got a question for yas.

if your car is stock height and you drive into a driveway and scrap the shit out of your front bar can you sue the council for the damage? or even if you arnt stock height but are still at the legal height of 100mm? :P

Surely this thread is a joke.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
    • One way of putting the fuel surge idea to rest, is that even when in neutral/clutch in or free revving it still has the same issue, it can’t even get to limiter (7800) so to me that says it can’t be g force, I’m not trying to argue I just want to find the f&$king issue 😡
×
×
  • Create New...