Jump to content
SAU Community

Recommended Posts

hey guys got a question for yas.

if your car is stock height and you drive into a driveway and scrap the shit out of your front bar can you sue the council for the damage? or even if you arnt stock height but are still at the legal height of 100mm? :unsure:

Link to comment
https://www.sau.com.au/forums/topic/118571-got-a-question-for-yas/
Share on other sites

Why would you imagine the council would be liable for you driving your car in such a manner that it causes it to scrape against the driveway? If anything, they should sue you for damaging their driveway with your car...

Why would you imagine the council would be liable for you driving your car in such a manner that it causes it to scrape against the driveway? If anything, they should sue you for damaging their driveway with your car...

Yeah I totally agree. I don't think the council will pay for damage caused by an impact due to a drivewy lip being too high. In the same way they won't pay for damage to your car caused by an impact due to the posted speed limit being too high.

yeah, i dotn think ur gonna get much support on here, not to sound harsh, its just reality. where was the driveway anyway? is there any rule as to the angle on a driveway? coz it would make sense that any legal height car should be able to get up any driveway, within limits of course... not EVERY car and EVERY driveway, but i know alot of cars that scrape, and aint even that low

e.g. a stock skyline drivin through an intersection (not a driveway, but still...) at well below the speed limit scapes coz the road has a big mound in it, and on the dip on the other side, hits the groud with sum force. and this was on a main road crossing the princess highway

edit - i am aware the overhang is just as important as ride height, so i dont expect every car to get in every driveway, but most should be able too

Edited by VB-

From a legal point of view, the council are pretty well sewn-up. That's not to say that they're above the law, but you would need a tightly strung case to get them to concede anything.

I know a case that ran against a Metropolitan council a few years back. It ended up running for years, and racked up millions in legal fees. Eventually, the council lost the case, and was ordered to pay costs...

Needless to say, the residents of that council district STILL have a levy in their council rates to make up for the fees paid by the council for losing.

my parents built a house in a develpoment a couple of years ago, and for some f**king stupid reason there was a traffic island built right across the driveway. and the house was on the right side of the road and the end of the street was a dead end, so you either had to drive over the island or go to the end of the street and do a 10 point turn (due to lack of parking everyone parks ther cars in the street)

told the developers, they came and shortened the island, so now you can get in, but only just. easier to just drive on the wrong side of the road

  • 4 weeks later...

just checking gee wizz just a question! i know a girl who stepped in a pot hole on a foot path and broke her ankle and got 12 grand from the council for there poorly maintained foot path. but you cant get anything for damage to your car for a poorly maintained road?

And for those of you saying i should be sued for daqmage to their driveway and that i should learn how to drive, im not an idiot i mount it on an angle.

why is the legal height 100mm? is it to protect the roads, speed bumps and driveways? or is it to prevent damage to your car?

if vic roads build roads and streets and have a rule of 100mm and i stick to that rule and their road damages my car i should get compensated.

im not saying i will and i know ive got no hope getting it. but i thought fellow car enthusiasts would agree. makes sense to me.

obviously im careful not to damage my car but hey shit happens and when it does its because of crappy roads streets and driveways.

just checking gee wizz just a question! i know a girl who stepped in a pot hole on a foot path and broke her ankle and got 12 grand from the council for there poorly maintained foot path.

Thats a whole nuther kettle of fish.

The 100mm rule would be in effect, to prevent you from bottoming out over every dip and bump in the road. Bottoming out can be dangerous, as in extreme circumstances it could cause one or more tyres to lose contact with the road, hense the potential to lose control. 100mm would be the figure decided on, that would prevent you from bottoming out on anything other than the most extreme conditions.

By the way, I have seen plenty of stock cars scrape on some driveways.

Edited by Thunderbolt

Ok lets angle this question from another angle...as we all know to repair a cracked front bar is relatively cheap.

eg

John smith driving down the road in his r34 vspec II and hits a pot hole damaging one of 4000 dollar rims!

What do you think would be the outcome under these circumstances?

From a legal point of view, the council are pretty well sewn-up. That's not to say that they're above the law, but you would need a tightly strung case to get them to concede anything.

I know a case that ran against a Metropolitan council a few years back. It ended up running for years, and racked up millions in legal fees. Eventually, the council lost the case, and was ordered to pay costs...

Needless to say, the residents of that council district STILL have a levy in their council rates to make up for the fees paid by the council for losing.

This brings forward the question, is the counsil hated by its residents for continuing to persuse the case. Or is the resident that sued hated by all for the higher rates ;)

hey guys got a question for yas.

if your car is stock height and you drive into a driveway and scrap the shit out of your front bar can you sue the council for the damage? or even if you arnt stock height but are still at the legal height of 100mm? :P

Surely this thread is a joke.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This was a huge help.  We followed the steps,  although shifting into 2nd was actually into 3rd for us,  and 1st was into 2nd ( steps 9 and 11) .  The long flash was the 4th flash.  So shift solenoid A is possibly the culprit.  Is this inside the transmission itself? Or is it accessible by just front the pan? Or is it bolted to the outside of the transmission?  Thanos for your help everyone
    • Can you enlighten me on your best practice regarding these hoses? I don't wanna make the same mistake if you already got a better solution.
    • I have some silicon hoses already, for example engine to watercooler. But yeah, I get the sentiment. The lower intercooler silicon hose is drippy too, despite not being very old. Does anyone except Nismo make these same lines out of rubber? Long term I think they'd be the better replacement, especially since the car won't live as hard a life anymore as in the past nor be driven as often.
    • I know most issues are just age related. But for example the turbo oil drains, there is dash adapters for these and you can just make a braided teflon line for them and (probably) never have them leak again. Also not terribly expensive. Can you even get the factory hardlines from new? Or are they repairable if they break?
    • I know it'd be much much easier with the tool. I hope I can find one that won't take 3 weeks to get to me an isn't a "Asian models kit" that has tons of (to me) useless adapters for a load of cash.   It's a summer project/fun car. I do wanna enjoy it, without endless downtime over and over. So yeah I would even go and buy an engine crane + stand to save myself the trouble of hard to reach or unreachable places going bad later on. Would also be a good opportunity to put on a Fluidamper, renew the mains seals and stuff like that. I have some money on the side that I can use for that, what I wouldn't want to or be able to do is let everything be done by a shop or have my engine completely rebuild right now. I intend to do most of the "doable" jobs myself. Pulling an engine can't be that hard, can it?
×
×
  • Create New...