Jump to content
SAU Community

Recommended Posts

i have an auto r32 gtst and this might sound like a stupid question but i havn't owned a turbo car before so be kind.

does the auto gtst still have a stock bov?

if yes i think mine does not have one as when i'm on boost and i take my foot off there is no noise like one would expect.

also, if yes then where is it located? on my intake piping before the throttle body and before the bend there is a small pipe which runs off the main pipe which leads to nothing and is blocked off...anyone know if this is where it should be...or does someone have a pic of a stock bov which i can compare to. maybe its there but stuck or something.

as i said i havn't owned a turbocharged car before so i am learning as i go...

thanks,

Waz

Link to comment
https://www.sau.com.au/forums/topic/11910-bov/
Share on other sites

MM2death has given you the pic.

If your one isn't making any noise, then it is probably because you have the standard air box.

When you have a pod filter, it is very free flowing and you can hear all sorts of induction noises.

also, when the bov vents, you will hear a sshhhhh sort of sound.. different to the aftermarket psshhtt sound.

the standard bov makes more like a hissing sound.

IF your bov is removed and all holes are blocked off, and you put a pod filter on, when you back off from the accelerator, you will hear a fluttering sound.. like ch ch ch ch ch ch

Hope this helps.

And there are a fair few turbo cars (engines) that don't have bovs as standard..

here are a few.

Cordia turbo.

CA18DET engined cars.

VL Turbo

That's a few off the top of my head.

Link to comment
https://www.sau.com.au/forums/topic/11910-bov/#findComment-211395
Share on other sites

Originally posted by WazR32GTSt

on my intake piping before the throttle body and before the bend there is a small pipe which runs off the main pipe which leads to nothing and is blocked off

Mate... if someone knows what that is i'll fall off my chair.

ALL Auto's i've seen... R31/R32 (imports we are talking here) and i'm assuming it's the same for a 33 but ain't seen and auto one yet.

They all have that little pipe thing your talking about and it goes nowhere and does nothing. (that i know of)

It's also the easiest way to tell if you car has had a manual conversion done to it at any stage :(

Link to comment
https://www.sau.com.au/forums/topic/11910-bov/#findComment-216550
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Stunning car.  Looks amazing!  You're in the UK?  How the hell do you stop your car rotting away beneath you?  British cars are the WORST I've ever seen in regards to rust.  Some of the cars SR Autobody have done are borderbeyond saving.
    • not a date code? or a foundry code? 
    • I have up to date pics of the engine build and turbo conversion over on my instagram @skpro_jects if you want to take a deeper look.   Basically the exhaust manifold is straight bolt on and the ports match (they arent any smaller than a 25 or 26 head).    the intake ports are different shape so the 20/25det manifold will bolt up but wont match properly or seal. You will need to port match using the 25det gasket as a stencil. Personally i ran the entire stock 20neo intake setup and have configured the swirl valves and torque valve to work based on my custom parameters to help with off boost response and spool. But this is using a standalone aem v2 ecu. The stock 20det ecu wont be able to control them.     
    • Hi. a little later but if the topic is here. So...the exhaust is the same and you can use 25/Turbo or any aftermarket? What about intake side? Is it too "plug n play" or? (i do not remember for 100% but i think that one intake to head gasket was little bit different than on the RB25 - i bought gasket kit way back) I know that even if it "plug" those butterfly swirls would cause ECU to be confused or?   Just asking for the info 🙂 and of course the RB25 things are easier to come by  
    • A few more recent pics
×
×
  • Create New...