Jump to content
SAU Community

Recommended Posts

hey everyone,

well had something really weird happen on me today driving to work, fuel guage went from half to empty.... in 1 km! a wicked fuel economy of 3000ltr / 100km's, yeah!! :P

i wasn't leaving a trail of flamming fuel behind me and the car was still running fine despite being dead on empty with low fuel light on so i know i've still got fuel but was wondering what could be the cause of the guage thinking there is no fuel left?

cheers,

daniel

Hi,

I had this issue and I believe there is a thread regarding this. Restarting the car fixes the issue or driving on empty for a while. No errors appear on the Consult for this either (from what I have seen anyway).

Let me know if you figure it out please.

check the fitting on the tank .. there are 2 plugs . one for fuel pump with 2 wires... one with 3 wires for the fuel level sender ..

could be earthing out somewhere on the signal wire which would make it show as empty

so pull up the carpet and all that... and then where exactly will i find it, drivers side, passenger side... right in the middle? i have changed my rims recently and took the spare out to get the tools, maybe i knocked something?

Sounds like the floats fallen off.. but I'd check the wiring first (easiest option).

Inside the boot, remove the carpet panel thats up against your seats. You should then see and ECU looking thing (I think its the HICAS controller or something like that). Theres a lid with bolts all around it on the shelf type thing. Thats how you access the fuel pump. It might be near that. I'll check the service manual tonight and confirm.

I think its the HICAS controller or something like that

good, i'll rip that out...stupid car walking sideways on the roads :P

cool, cheers for that mate. When i get the chance i'll check the boot out - for a little bit last night the fuel guage raised a bit, when i pulled over to drop a friend home, then proceeded to drop again when i started driving, back to empty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for asking the question we were all thinking!
    • Does this apply if you use an aftermarket ecu as it probably doesn't have that functionality built it? (Assuming it doesn't, in my case, apexi)
    • Given you already have the engine cross member to match and likely gearbox mount to. The SR20 has a head start on the RB in this case. They handle GREAT with an SR20, lots of fun.   One I did back in the day
    • have no doubt and wanted too trust me and may regret later not necessarily worried about weight (would be 8 kg ish total) it was more the $$ to do it properly is about $6 - $7K in hardwear need long 310mm stroke jacks etc - plus install and call me whatever im not doing it myself even if wanted too cant weld etc  - thats $10K installed vs fraction of that cost while Ive spent some money on this POS I actually really dont like doing so unless its got a large chance to make me go faster 😁 hey in still carting this things around on a 15 yr old rusted open trailer so I can spend on racing not buy a new trailer to look better the manual jacks Ive had done are heavy and take space but are transportable and usable anywhere - taking or organizing even compressed air let alone nitrogen which is more whats needed coming from Perth to Winton or Sydney or the like honestly just adds to my brain headaches/ hurts of organisation also ha 15 mins job will get down to 2 - 5 min job vs 1 min job for airjacks - all tradeoffs I spose
    • Purely out of curiosity, how do you know all this @dbm7? Do you work with automatic gearboxes professionally? This goes way way way beyond "I've had an automatic Skyline once and did some mucking around"
×
×
  • Create New...