Jump to content
SAU Community

Recommended Posts

Hey guys,

as stated my car makes kind of a rattle noise when i rev the car just a bit over idle but the noise goes away probably at 1700rpms.

the engine sounds fine then it kinda goes *dud dud dud dud dud* but really fast, almost sounds like a bearing is gone in the cam cover.

a freind of mine said he was looking at a gtr and the owner said the noise was fine.

the car is a 96 rr33 gt-st.

any thoughts?

cheers

Possibly the cam belt is a little loose? My GTR made a similar noise that i coulda sworn was coming from the engine, Benno @ Racepace fixed it in about 10mins when it was there for other work. :P

that happend to me i had the exact problem it was my timeing belt it takes a while to get to but if that snaps man i wouldent want to be u on the top of the engin at the front there should be a sticker the last time the timing belt was changed mine wasent changed at all from when it was made im glad i did now it runs a bit better and no nise any more it cost me 225 for timing belt and to install it as well because i got some other stuff done as well to it witch lowed to labour cost

Yeah i have felt that, and when i rev it by pulling on the throttle it gets louder then goes away after a certain rpm.

im buying a cooler and boost controler etc and i was gonna boost it to 12psi but i think ill wait till i get the belt changed.

hoping to have it done in a couple of weeks.

ill get him to do the full 100k service.

anyone know how much im looking at?

cheers

Mine cost somewhere around $400-500, but that was because the idiots at my local nissan dealer decided it was a good idea to take off the front bar, drain the cooling system, remove the radiator, change the belt and tensioner arm (i had asked for that), and then replace my radiator fluid with expensive nissan branded stuff. This isn't really helping but i'm just venting frustrations - originally they had quoted me about $200 or so.

  • 10 months later...

Hi i think i have this same problem, Cam belt was changed 2 months ago, last couple weeks i have developed a rattle just above idle but only when cold, the noise is deff coming from the timing belt cover,

have attached recording, is this the same problem? any ideas on how to resolve?

(have searched many skyline forums and this seems to be closest to the problem)

Cheers

Dazzler

Recording3.wav

P.s sorry about the old thread... couldent find much else on this...

Edited by Dazzler22
Mine cost somewhere around $400-500, but that was because the idiots at my local nissan dealer decided it was a good idea to take off the front bar, drain the cooling system, remove the radiator, change the belt and tensioner arm (i had asked for that), and then replace my radiator fluid with expensive nissan branded stuff. This isn't really helping but i'm just venting frustrations - originally they had quoted me about $200 or so.

How else would u change the timing belt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...