Which Turbos?

[rawnsGTR]

Hey everyone!I own an R32 GTR with rebuilt engine.It consists of prepped and balanced rodswith ARP 2000 rod bolts,R33GTR crank,aries pistons,ACL race bearings,metal head gasket,HKS/ARP head studs,port and polished head,1mm over-sized stainless exhaust valves,N1 oil pump,cam gears,pod filters and nismo dump pipes and 3 1/2 exhaust.looking to make 450-500rwhp.Is it achievable reliably with this engine build and what turbos do you recommend?I only want it for street and it has only 5000km since rebuild.Preferably twins to bolt up to nismo dump pipes but if i have to go single.........Any help would be great.Thanks guys/girls.

Edited May 25, 2006 by rawnsGTR

[sh@un]

Garrett T04Z all the way baby!

[R31Nismoid]

Why would you say a t04z if he wants approx 350rwkw.

Overkill, even when he says he would prefer twins.

Anyway, have a look here (its in the sticky thread aswell)

http://www.skylinesaustralia.com/forums/in...opic=80624&st=0

[Mr. Keets]

How about Garrett GT2860R 707160-5 lowmounts, bolt on and the price is right

I got 406rwhp on an internally stock RB26 only restricted by fuel and common sense (dont want to do the rebuild just yet)

http://www.turbobygarrett.com/turbobygarre...0R_707160_5.htm.

after reviewing the suggested reading material check out the sticky :Rb26 Turbo Upgrade, All Dyno Results

Good luck

Edited May 25, 2006 by Mr. Keets

[mac71]

I'm also in this boat of trying to choose a turbo for my build...HKS is out of the question simply because of the cost, too rich for my blood. The GT2860R's are a great alternative and would pretty much meet most people goals...

http://www.atpturbo.com/Merchant2/merchant...tegory_Code=GRT

But I cant help but think if the better, more expandable choice would be the GT3071R's. 2 of these bad boys would do wonders...what do you guys think?

http://www.atpturbo.com/Merchant2/merchant...tegory_Code=GRT

The 3071 may be a little too big on the trim side so here is another alternative but still bigger than the GT2860R...Thoughts?

http://www.atpturbo.com/Merchant2/merchant...tegory_Code=GRT

Edited May 25, 2006 by mac71

[RACESPEC]

Hey Guys

The most common upgrade we see it the 707160-5 Upgrades, but there is also a -10 available which has the same specifications as the GT-RS from HKS.

The GT3071R would be ideal, more so in a High Mount setup, as they are comparable to the 2835R from HKS

RACESPEC SALES TEAM

[rawnsGTR]

Hey guys,thanks for all your help so far.had a look at the GT2860R's and they look like a very good option.should be capable of making the power i want.