Jump to content
SAU Community

Recommended Posts

No worries... Happy too... :thumbsup:

As for the PWR we had her up just over 300rwkw then we turned her back down to 270rwkw to make it drivable...

what turbo are you running? What rpm does it come on? What boost? I had 320kw at 15psi but the fconv couldnt be tuned so i only ever really ran 12psi on the street which was enough, afr's were way to rich though and i continually fouled plugs....I miss driving/being in high hp cars :teehee:

Down the quarter mile yeah...

Ill take that bet... I get to run slicks on the rear and you get to run street tyres...

ur on :thumbsup:

oh and while we're at it, wanna put money on it too?

i'll be running street tyres, slicks are for girls :teehee:

Short story;

GT 30 0.82 rear

Ran 16psi to make 267rwkw @6200rpm

Ran 19psi to make 301rwkw @6200rpm

Boost came on hard at about 4300rpm...

Turbo is capable of 24psi so estimate about 400rwkw is its limit on a dyno dynamics dyno... But my motor is not going to handle anythign more that 16psi at a track day... So thats where it stays and then for dyno days we will run 19psi...

ur on :thumbsup:

oh and while we're at it, wanna put money on it too?

i'll be running street tyres, slicks are for girls :teehee:

Whats your estimate on my times down the quarter???

Considering I spent over 4 grand just on the rear rack, suspension and diff... So its setup for drag...???

Short story;

GT 30 0.82 rear

Ran 16psi to make 267rwkw

Ran 19psi to make 301rwkw

Turbo is capable of 24psi so estimate about 400rwkw is its limit on a dyno dynamics dyno... But my motor is not going to handle anythign more that 16psi at a track day... So thats where it stays and then for dyno days we will run 19psi...

u do realise a forged motor will only set u back about 5k?

Whats your estimate on my times down the quarter???

Considering I spent over 4 grand just on the rear rack, suspension and diff... So its setup for drag...???

mid 11's

hey shane.. uh its little american but not strong..

im born in hawaii.. so im from all over the world.. ahaha

lol thats pretty funny

is this shane vs col??? Id put money on that..but i wanna see how both of you drive first, have either of you been to the strip before? What are your 60fts?

1.8 60' with 265x17x40 hankook k104 with a R33 gtst and 191rwkw :thumbsup:

full specs of both cars...is your car going to be set up for drag shane?

mine's too big to list, and i've listed it b4, however i'll go copy and paste it...and no, it's being set-up for circuit/hill climbs :teehee:

oh and i've done about 25 passes with my old car :thumbsup:

5k how did u spend 13.5 and not get it idling yet?

go all out lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You know, that is exactly the thing that I was thinking a coupe of hours ago. I even had a plan for a meme, involving one big one, another big one, and the Old El Paso girl saying "¿por que no los dos?"
    • NoS, 2 of the big ones.
    • Oh, that's grim. Something bad has been happening there.
    • Put an endoscope down the hole and saw this. Not quite all around the bore but a good 60% at least. Chin to the chest and towards further disappointments I guess.
    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
×
×
  • Create New...