Jump to content
SAU Community

Recommended Posts

blank ported 26 head, once john's seen it we'll decide what else is going in it (260/270 10.25 cams for sure atm)

Your right, I am delighted.

Interesting your going for that cam selection though. Any reason other then conronic hunt as to why you wouldnt go bigger with a built head?

Your right, I am delighted.

Interesting your going for that cam selection though. Any reason other then conronic hunt as to why you wouldnt go bigger with a built head?

it's a track/hill climb car so i'm after low down/mid punch and the 260/270 i've been told by 2 shops now would be ideal. it'll drop the peak power down abit, but i'll have improved low down/mid power, so it'll work out better.

also no need for oversize valves now

it's a track/hill climb car so i'm after low down/mid punch and the 260/270 i've been told by 2 shops now would be ideal. it'll drop the peak power down abit, but i'll have improved low down/mid power, so it'll work out better.

also no need for oversize valves now

nigga please peak power = dick size :blink:

:action-smiley-069:

<3

nigga please peak power = dick size :blink:

:wave:

<3

indeed, but how cut would you be if/when a 'lower powered' car kicked yo ass? hows my dick size then :action-smiley-069:

go 264/272....or even better 272/272 :(

nah, tomei only do 260 or 270

and i'm goin tomei as my engine builder has this to say:

"tomei make horsepower, jun & hks are overpriced, and are not accurate in their sizings i.e hks undersize their cams & jun oversize their cams, while tomei are spot on"

indeed, but how cut would you be if/when a 'lower powered' car kicked yo ass? hows my dick size then :blink:

nah, tomei only do 260 or 270

and i'm goin tomei as my engine builder has this to say:

"tomei make horsepower, jun & hks are overpriced, and are not accurate in their sizings i.e hks undersize their cams & jun oversize their cams, while tomei are spot on"

Maybe your builder just gets tomei stuff cheap?

Because he might be right but, jun and hks are pretty big names and it would be a pretty big call to say there both not up to scratch. Not saying theres anything wrong tomei either btw.. just throwing it out there...

indeed, but how cut would you be if/when a 'lower powered' car kicked yo ass? hows my dick size then :blink:

nah, tomei only do 260 or 270

and i'm goin tomei as my engine builder has this to say:

"tomei make horsepower, jun & hks are overpriced, and are not accurate in their sizings i.e hks undersize their cams & jun oversize their cams, while tomei are spot on"

fair enough.

indeed, but how cut would you be if/when a 'lower powered' car kicked yo ass? hows my dick size then :blink:

nah, tomei only do 260 or 270

and i'm goin tomei as my engine builder has this to say:

"tomei make horsepower, jun & hks are overpriced, and are not accurate in their sizings i.e hks undersize their cams & jun oversize their cams, while tomei are spot on"

True, but my e-forum dick will still be bigger.

Maybe your builder just gets tomei stuff cheap?

Because he might be right but, jun and hks are pretty big names and it would be a pretty big call to say there both not up to scratch. Not saying theres anything wrong tomei either btw.. just throwing it out there...

he doesnt sell gear, he just builds motors lol

Tomei make good gear. 270in/270ex then :wave:

On a serious note 260/270 selection is sensible.

:blink:

True, but my e-forum dick will still be bigger.

not when you dont have a car :action-smiley-069:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Can you log IAT? Whilst WTA coolers have their place, doing any sort of sustained run is not one of them There are fixes that slow down the heat soak, like ice boxes, which don't last that long, and interchillers, which are fairly expensive, up grades to the WTA cooling radiator, which may require a bigger pump, and upgrades to the reservoir size,  and upgrades to the cooling fans, but, it all still heat soaks, and takes ages to come down in hot weather  For a turbo, that isn't locked into WTA like my PD blower is, can you not possibly swap to a nice air to air intercooler????, it would be better for sustained runs then, and have alot less things that could go wrong in my opinion 
    • So, the other thing I've sorted is a baseline dyno run up at Unigroup's new location. The auto trans was a little unco-operative by both shifting down when the throttle was floored on the dyno (so Mark had to ramp it up more slowly than in a manual) and also by shifting up at 6,000 even in sports mode instead of the indicated redline of 7,000 Still, on a hot day it made 240rwkw at 16psi which seems about right for 300kw (400hp) through an auto at the wheels.  The shape of the curve is not quite right because it was not full throttle to about 4,500 to stop it kicking down, but until I can get a tune on the auto trans control this was the best we could do.....full boost will be well below 5,000 once that is sorted, I'll get some data logs when I can to confirm For comparison, the R32 made 255 at 12psi (at 4,500) on the same dyno with tune, n1 turbos, cam gears, big exhaust but otherwise all standard so the v37 is likely a little better out of the box. One thing that is very clear is that the standard water to air intercoolers are not up to sustained use at full throttle in warm ambient temps. After about 5 runs (so only a few minutes full throttle), it was pulling boost and timing and dropping 10-15% power. Unfortunately I didn't get that printout and the Unigroup guys are away at the moment, will try and get hold of it on their return. So, looks like a healthy engine to start modifying and the only real area of concern is the w2a heat exchangers which the aftermarket has plenty of solutions for    
    • I maintain it actually looked really nice in person. So much so that I thought "No, this is illegal" but there it was, clear as day. I think we can easily call the wing and wheels/height to be transformative. Not saying it's better than the GR Whatever, or the 86, or the WRX STI or anything of that sort (the internet says it all bolts up so you can buy best of all worlds?) but it's still at least a thing and not nearly AS bad as people say.
    • That's less offensive than the previous gen.....except for all that ugly black tupperware around the edges. Blerck!
    • I leant out the window recently and took a picture of this new WRX. It looked real damn fine in person. It's faster around a track (stock) than a (stock) GR Yaris. It's much more practical despite being heavier. It's significantly cheaper. This gen tunes really well, much better than others. .... I think they're probably a lot better than people expect.
×
×
  • Create New...