Jump to content
SAU Community

Recommended Posts

if you run a greddy plenum it will open up the top end and it shouldnt nose over...probably need a good exhaust manifold too (6boost). Our gt30 .82 rear went to 320rwkws without water injection and it pulled all the way to 8k redline. Remove all possible restrictions in the bolt ons and you can run the smaller puffers further to the edge without losing power.

Im up to 332rwkw now on 21psi and still have stock cams...

So a goal of 350rwkw (which to be honest is too much for a daily driven car) is easily achieved from the Garrett GT30R also know as the GT30/40...

Im at 21psi by 4000rpm btw, so its quite streetable, just farking stupid round town when it comes onto boost and jumps sideways... :unsure:

So i turn the boost controler down to 16psi where it makes just on 280rwkw and thats far easier to handle round town... :O

Im up to 332rwkw now on 21psi and still have stock cams...

So a goal of 350rwkw (which to be honest is too much for a daily driven car) is easily achieved from the Garrett GT30R also know as the GT30/40...

Im at 21psi by 4000rpm btw, so its quite streetable, just farking stupid round town when it comes onto boost and jumps sideways... :O

So i turn the boost controler down to 16psi where it makes just on 280rwkw and thats far easier to handle round town... :P

thats promising. i said noel's car will break the 400rwkw mark, and if ur results are anything to go by, he should do it fairly comfortably :unsure:

all noel's has to do, is pick up 69kw from 4psi more boost, cams & massive headwork, piece of piss i reckon

thats promising. i said noel's car will break the 400rwkw mark, and if ur results are anything to go by, he should do it fairly comfortably :unsure:

all noel's has to do, is pick up 69kw from 4psi more boost, cams & massive headwork, piece of piss i reckon

Easy.

if my bitsa can can 490rwhp/365rwkw on a td06-25g with t78 wheels on 1.5bar (3800rpm) Noel will piss it in

all noel's has to do, is pick up 69kw from 4psi more boost, cams & massive headwork, piece of piss i reckon

Fkn A doggie, shouldn't be a problem. Andy got 306rwkw on 18psi i'd like to see them bump it up to 22 or so and see what he can get. He doesn't think it'll be much of a difference but with the new fuel pump and shiz he shouldn't be running out of fuel like last time. I'm trying to convince him to go back to chiptorque, best tune we ever had was from them.

theres heaps of stuff on youtube, theres a clib with arabs drifting a Carrera GT and a McLaren Mercedes SLR....

I too am watching youtube clips...

cept i'm reminiscing so mine are in the form of

http://www.youtube.com/watch?v=wor-Z4SyWCg

http://www.youtube.com/watch?v=Qmve365Ti1k

I too am watching youtube clips...

cept i'm reminiscing so mine are in the form of

http://www.youtube.com/watch?v=wor-Z4SyWCg

http://www.youtube.com/watch?v=Qmve365Ti1k

かわいらしい さくら - MISS KITTEH! says:

haha and I wasn't a fan of human nature

かわいらしい さくら - MISS KITTEH! says:

except for one track which was very BSB/nsync

かわいらしい さくら - MISS KITTEH! says:

http://www.youtube.com/watch?v=Qmve365Ti1k

Josh says:

some one will think im queer when they see this history

かわいらしい さくら - MISS KITTEH! says:

bahahah it will just confirm rumours

Josh says:

they're only true when im drunk

Josh says:

lol

かわいらしい さくら - MISS KITTEH! says:

z so i'd find you at the beat then?

かわいらしい さくら - MISS KITTEH! says:

hehe

Josh says:

they sell cheap drinks

Josh says:

quiet u

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The nissan manual says to change coolant every 2 years. Is this still necessary if you're using coolant like Penrite or nulon which has improved over the years? It says it lasts 500,000km which seems hard to believe lol.
    • According to the Muse website, totally different material. The originals were that horrible solid foam rubber that was used for a lot of rear spoiler/flap things, like on Mitsu Galan GSRs. Heavy, and with enough compressibility/flex that any paint on them would crack fairly quickly. The Muse ones are just ABS, which is obviously similar to GTR lower front lip, etc etc. ABS is a good choice if you have the ability to tool up for it. The only thing better might be TPU-RIM or something equivalent. The TPUs were good. Plenty of flexibility (in twisting, bending, etc) but not really in compression.
    • Update 24/01/2025:    Bought a GReddy/Trust Intercooler (crossflow spec-LS) that was meant for a R33 GTST $871 AUD shipped, and a GReddy Profec boost controller $483 AUD, both brand new from Japan. Being honest, I would've thought the intercooler kit was discontinued but I guess not yet. Decided due to funds + time, I'll stick with a nistune on this stock-ish setup ( stock turbo set to probably 10-12psi ) and have it run cleaner ( suspect the 3" turbo back etc has sh*tted on my economy ) for my trip down south soon for the WSBK. Hopefully I can get it all installed and tuned by then. As for who I am getting it tuned with, I will be going with Toshi, (not hearing back from DVS so scratch that). There is also Birrong Auto but not sure if they do nistune installations and if they even tune it... Otherwise, anyone know where I can get my hands on an aluminium intake/suction pipe for an RB25DET NEO?
    • The german cars I've worked on seem to have that issue(in more than just headlights). Mostly where hot, but also just the insulation hardening and cracking in various places. Not abnormal from what ive seen.
    • According to the Muse website, similar material, but not the same. Meant to help with stopping the paint cracking. In saying that, I had genuine ones on my last grt, and never had that problem.   Could you post pics when you get them? Very much thinking of buying the Muse ones over fibreglass.
×
×
  • Create New...