Jump to content
SAU Community

Recommended Posts

damn, just had to re tie the boat up, this wind is making it swing hard core was bending down tie in back up, and getting soaked by the waves crashing into the pontoon :)

Dan how much for a .82 housing and how much could i get if i sold my 1.15 housing.

I'm pretty sure they will exchange the housings plus cash their way. Might cost you $150

I can check for you tomorrow if you like. How many K's on the 1.15 housing?

And is it a 1.15 or a 1.06?

I'm pretty sure they will exchange the housings plus cash their way. Might cost you $150

I can check for you tomorrow if you like. How many K's on the 1.15 housing?

And is it a 1.15 or a 1.06?

Sounds good mate :) , if thats the case order one in for me thanks.

On my receipts it says 1.15A/R. I think its done about 20 to 25000 km.

Finished modifying the std rb25 fuel rail. Converted it to twin feed. See, thats how you save money on buying a billet ally rail and then have to change to top feed injectors. Keep the same injectors and get a flash big hp supporting rail without having to buy it! Probably cost $30 bux in fittings as they were s/s speedflow. 30mins in labour time, drill and weld on fittings.

The photos were before i cut the std feed off and welded it over. But it shows the three -6 fittings i tigged on. Rail feeds have gone from 6mm to 8mm now. Should increase flow abit.

post-12828-1187695264_thumb.jpg

post-12828-1187695304_thumb.jpg

post-12828-1187695336_thumb.jpg

yeh your right..it does fully look home job like...but we didnt want to change injectors...new rail say 200bux a set of top feeds around same cc probably another 600-800bux

Or $30bux for the fittings. I cant charge the race car a labour fee either...so yeh. I think my old man wants it to look full backyard style...give off the homeless look. so when we win it doesnt look like were pro in anyway lol.

yeh your right..it does fully look home job like...but we didnt want to change injectors...new rail say 200bux a set of top feeds around same cc probably another 600-800bux

Or $30bux for the fittings. I cant charge the race car a labour fee either...so yeh. I think my old man wants it to look full backyard style...give off the homeless look. so when we win it doesnt look like were pro in anyway lol.

the extremely loud gearbox whine and the mega brakes sorta give away that look :)

Finished modifying the std rb25 fuel rail. Converted it to twin feed. See, thats how you save money on buying a billet ally rail and then have to change to top feed injectors. Keep the same injectors and get a flash big hp supporting rail without having to buy it! Probably cost $30 bux in fittings as they were s/s speedflow. 30mins in labour time, drill and weld on fittings.

The photos were before i cut the std feed off and welded it over. But it shows the three -6 fittings i tigged on. Rail feeds have gone from 6mm to 8mm now. Should increase flow abit.

post-12828-1187695264_thumb.jpg

post-12828-1187695304_thumb.jpg

post-12828-1187695336_thumb.jpg

ok i take my comments back now :) ur allright mate.. i personally would have taken the easy route and gotten a billet.

Mickey T's arrived and clear the guards. WHOOOOT! :)

what size rims and offset.. ur not using GTST are u?

i can assure you if we hadnt already gotten a set of 850cc sards then we would have gotten a billet top feed rail and some descent top feed injectors.

What rules stipulate that you cant be a backyarder if you have a dogbox and alcons?

Oh, heard that autronic have now come out plug n play for rb25 and rb26 with some sweet built in thingys. Like you dont need the cdi apparently as its got something similiar built in....dont know if you still need the trigger disk or not though. I could be wrong, but these are things ive just heard.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I clean my wheels every time I wash the car, I also clean the barrels, the only product I use on the wheels is truck wash and a pressure washer, followed by (inset your chosen name brand) wash and wax, time per wheel is probably 2 minutes total, cleaning the barrels is easy with one of these microfibre thingies on a stick from Sabco, they're also great for getting in between the front guards and body, and tight spots in the engine bay  
    • An updated post here. Sounds to me like there's definitely a bit of sketchiness here.  Old mate with 10 rusting Torana's in the front yard might be more who they're focussed on. (For right or wrong).
    • Is this not just about people wrecking, and storing, multiple cars in their front yard? I now a tow truck driver that was contracted by the council to clean up housing commission front and rear yards in houses and unit car parks I'm all for working on, and doing maintenance on your car in your garage or driveway, but some people definitely take the piss  There's one house locally to me that I walk past regularly where the front yard and driveway looks like a wreckers, multiple cars in various stages of being stripped, and the yard looks like all of fluids are basically dumped on the ground I may be wrong, but it seems that the initial reports, which I've seen nothing actually official about yet, may be getting taken out of context, like alot of the latest "the sky is falling" stuff found on the youtubes for clicks
    • have they? Link appreciated. I live in Casey. I can see both sides of the argument in this case. There's a lot of sketchy stuff going on. There needs to be a clear definition of what this is supposed to be IMO. I wager the intent was to be a broad sweeping brush against people who have 4 cars up on blocks on their front lawn, not someone who services their own car behind their own gate on a weekend bothering probably nobody. But it'd be hard to legislate the difference there.
    • Oh, the wheels were already off. I wouldn't normally take them off to clean them although it does make it easier with the ceramic, so I might take them off when reapplying. I don't drive much but now with the ceramic coat, when I do drive and they get dirty I can get most off with the pressure washer. I'll be switching to dirtier pads soon which was the motivation for the ceramic as I usually just clean them and sometimes use Autoglym wheel protector. Nah, f**k the barrels! Haha, I'll give them a quick scrub when they're off the car and a pressure wash, but even I draw the line with the barrels. Yes, dark coloured wheels allow you to get away with a lot!  
×
×
  • Create New...