Jump to content
SAU Community

Recommended Posts

well the way i see it michael.

I've gotta get atleast pistons, there ~1200, then machine work, ~1k, then may aswell get rods aswell 890, then whats the point in putting the shitty stock head on with that fully built bottom end (have got all studs, bearings, acl headgasket now) when i have the ported blank head there that will be going on at a later date.

the budget i set aside to get the thing running by december didnt include new pistons or the likes, so this year is now certainly outta the picture. im over it, anyone got a light? sigh

Can i ask why you didnt allow for pistons and rods? I thought you had all those things already?

Crank isnt a big deal, if its just scoring its easy enough to go 10 or 20 thou over size.

Who would be doing the machine work if your getting the bottom end done? Cause you would need to do it right, since your aiming for big power....and i dont know how many shops out there know the tricks you need to do inorder to do it properly.

Can i ask why you didnt allow for pistons and rods? I thought you had all those things already?

Crank isnt a big deal, if its just scoring its easy enough to go 10 or 20 thou over size.

Who would be doing the machine work if your getting the bottom end done? Cause you would need to do it right, since your aiming for big power....and i dont know how many shops out there know the tricks you need to do inorder to do it properly.

when i bought the bottom end, i was told it had forged pistons in it, hence not needing new ones, and not budgeting for them.

nah crank s easy, dan's got a spare he was gonna throw out lol. theres grooves worn in the front and rear oil seals, and the crank pulley gear woodriff key hole is rounded off!

dan's getting me all the parts, and he's getting chilton to do the bottom end work, i'm getting john hill to finish the porting in the head.

looking at a gt42r with the .90 rear and a set of jun 272 11.35 cams, with .5mm os inlet & 1.0mm os exhaust valves

you going to jambo tomorrow? So long as the rain pisses off!

yeh mate i'll be there ;)

haha ur not cut r u marki? :banana:

nope.. shane u dnt annoy me... much...

anyway

UPDATE.. the lil scratch and dent i have is hardly noticable.. lil bit of body deadner here a bit of polish there and u got to look for it to see it.. and best of all none of this damn rain is gonna turn my iron horse into an iron oxide POS like shanes ornament :laughing-smiley-014:

ROUND 2.... FIGHT ;)

ahaha.. shanes gay i aint.. got a lady.. ahaha... :sorcerer:

u think ur box.. he knows i can box..

http://www.hardcoreware.net/image.php?src=...p;ts=1047529501

yes marki u may have a lady, but u believe in no sex b4 marriage. me on the otherhand, im not tied down, yet im still getting sex rofl

yes marki u may have a lady, but u believe in no sex b4 marriage. me on the otherhand, im not tied down, yet im still getting sex rofl

yeah I heard that shane was getting it on with 6 chicks at once.

by the way can you say hi to Mrs Palmer and her 5 daughters next time you see them shane.

and about your car dont get too down, save your money for the bits you need and then im sure everyone will chip in to give you a hand to finish it. Hell ill even risk my manicured nails to help.

BUT SHANE YOU HAVING BUTTY SEX WITH NOEL DOESNT COUNT AS SEX..

noels gonna be pissed

yehh, ur farked :banana:

yeah I heard that shane was getting it on with 6 chicks at once.

by the way can you say hi to Mrs Palmer and her 5 daughters next time you see them shane.

and about your car dont get too down, save your money for the bits you need and then im sure everyone will chip in to give you a hand to finish it. Hell ill even risk my manicured nails to help.

them bitches wear u out fast aye. they were saying last nite that they wanted to see their dad and 4 brothers again. any idea when u'll be finished with them?

i can do most the work myself (within reason) so that's no problem, it's just the farking mula. to get it running i'm now looking at close to 20k ;)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...