Jump to content
SAU Community

Recommended Posts

groovy.....i am still gettin parts :D

lol trueeeee.

i mite add, if ur going to use an n1 pump, make sure u have the right oil restrictors in, and a drain from the back of the head.

P.S found a sump yet? :ninja:

I will sell you a N1 oil pump, you get it when you buy the rest of my engine :D

for $500 ok no prob...

lol trueeeee.

i mite add, if ur going to use an n1 pump, make sure u have the right oil restrictors in, and a drain from the back of the head.

P.S found a sump yet? :ninja:

why would i need them....seriously.

no i havent...Dan said he had one though and a timing cover etc.

for $500 ok no prob...

why would i need them....seriously.

no i havent...Dan said he had one though and a timing cover etc.

x by 10 and its yours! and that would save you about that much in the long run over building your own :ninja:

for $500 ok no prob...

why would i need them....seriously.

no i havent...Dan said he had one though and a timing cover etc.

lets face it, ur not going to be easy on this motor, and ur going to see it bouncing off the limiter a fair few times. uve read the oil control thread right? rb's spin bearings because of the lack of oil in the sump, that means its up in the head.

restricting the flow to the head, and running an external drain from the back of the head, will help get all that excess oil back down into the sump, where its meant to be.

also, the n1 pumps flow more than the std pumps, but at the same pressure.

lets face it, ur not going to be easy on this motor, and ur going to see it bouncing off the limiter a fair few times. uve read the oil control thread right? rb's spin bearings because of the lack of oil in the sump, that means its up in the head.

restricting the flow to the head, and running an external drain from the back of the head, will help get all that excess oil back down into the sump, where its meant to be.

also, the n1 pumps flow more than the std pumps, but at the same pressure.

Fark that...too much money and i wont be bouncing off no limiter either. i think i will be putting around in this car.

Fark that...too much money and i wont be bouncing off no limiter either. i think i will be putting around in this car.

too much money? wtf are u buying an n1 oil pump then for? :domokun:

for ~50 bucks in mods u could save ur farking engine u toss :D

Fark that...too much money and i wont be bouncing off no limiter either. i think i will be putting around in this car.

whats the point of building it to putt around in it? Thats the main reason i am selling mine! I built it then had to spent the best part of a year babying it and it made me think 'what the hell is the point of this car?'

too much money? wtf are u buying an n1 oil pump then for? :domokun:

for ~50 bucks in mods u could save ur farking engine u toss :D

$50 bucks!!! ok where at...

and where else can i get an oil pump from...Nissan are gonna prob gonna charge me the same amount for a standard one.

whats the point of building it to putt around in it? Thats the main reason i am selling mine! I built it then had to spent the best part of a year babying it and it made me think 'what the hell is the point of this car?'

eh....ok....i mean not thrashing it, but i suppose that didnt help the last one.

$50 bucks!!! ok where at...

and where else can i get an oil pump from...Nissan are gonna prob gonna charge me the same amount for a standard one.

eh....ok....i mean not thrashing it, but i suppose that didnt help the last one.

build it to take punisment or give up now :D

$50 bucks!!! ok where at...

and where else can i get an oil pump from...Nissan are gonna prob gonna charge me the same amount for a standard one.

eh....ok....i mean not thrashing it, but i suppose that didnt help the last one.

all u need is a couple of $5 oil restrictors (chilton can make them up) and the back welsche plug in the head punched out, a pipe fabd up, pressed & screwed into place, a -10 fitting welded onto ur sump, and a piece of aeroquip oil hose and ur done!

i got my head drain pipe from r33_racer, pm him to see if he can make you one

the traders on here can supply n1 pumps for ~$360

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
    • Probably a smart choice to buy one vs build, purely for the motivation part as you said! Imagine the metal dust everywhere from grinding all the steel to build one. Ha ha ha!   Also, post a photo of your garage.   Mine is below, this is where I've been cleaning and have already half filled a caged 6*4 trailer. And this is after my cleaning expedition mentioned previously... The middle normally has a car in it, but I'm dumping things in the middle as I sort through them. And poor skyline was dusty and has had the lightest few drops of rain and now it looks atrocious and needs to be dragged back out and washed thoroughly! And yes to the right is technically another bay, you really can only see 2 bays out of 3 in this picture.  
×
×
  • Create New...