Jump to content
SAU Community

Recommended Posts

My current daily STI is far nicer than my GTR ever was. It's cheaper to run and insure and so far is only 0.3sec slower down the quarter for similar mods.

It also has an oil system that doesn't try and lunch my motor whenever it sees a long bend in the road.

That being said, when I had the GTR I swore black and blue I'd never have one of those WRX buckets of crap.

A stock wrx to a stock STI is more of a performance gap than people realise too. You wouldn't assume a GTSt was just like a GTR would you...

no, but I would assume a gtr is like a vspec.

Holden bloke... Soooo pass and I'm more looking for a small car

Pass my sister had one nothing but problems and i hated the thing hated working on it hated driving it juststraightuphateit

Bought It off her for 100 went for a skid day in a paddock on a mates farm rolled it a few time. Blew the motor and burnt it. Best thing the car did was burn

And tony that's a possibility, but wanting a small car like a mirage, starlet, rolla or something like that a little hatch

mazda 121.

I get my old one back this week.

the whore master.

the one and only.

the guy who got a missus and doesnt visit us anymore. :(

I get the occasional phone call, to give you an idea I still haven't caught his post count and he hasn't been here for over 8 months.

No one word whoreing either.... We were whore brethren as it should be

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...