Whoretown - Now Interest Free

[Bunta]

yeh coz its not a real HKS

Serious though, what else do you have? What power are you making at what psi and where? Simons maroon R33 is a self tune, self built and makes 270rwkw give or take everytime minus on an allstar dyno

Apexi AX53B70 rebuilt engine, cams, power FC 230rwkw at 14psi at allstar

[FineLine]

while I love drags i will be doing sprints as well. so the turbo selection is critical. Will definitely be looking at pon cams and adjusto exhaust gear as well.

the stage 3 hiflow of which i speak is the slide variant. will look for specs later.

Prawn cutlets and seas scallops. mmmmmmmmmmm

[Mr Kofi Ahmed]

why not a 2835 range turbo then...??

Thats what I said too, i was leaning towards the 25/40 as i thought Noel wanted his car for track, untill u said other wise. the 2835 would be a shoe in, with sane boost levels.

[Keegs]

while I love drags i will be doing sprints as well. so the turbo selection is critical. Will definitely be looking at pon cams and adjusto exhaust gear as well.

the stage 3 hiflow of which i speak is the slide variant. will look for specs later.

Prawn cutlets and seas scallops. mmmmmmmmmmm

Get a HKS 2835 and call it a day Noel.

[Mr Kofi Ahmed]

Apexi AX53B70 rebuilt engine, cams, power FC 230rwkw at 14psi at allstar

Without a doubt there dyno is wrong.

[Keegs]

Thats what I said too, i was leaning towards the 25/40 as i thought Noel wanted his car for track, untill u said other wise. the 2835 would be a shoe in, with sane boost levels.

Indeed, for Noels application I think it's 2835 FTW!!!

[FineLine]

Without a doubt there dyno is wrong.

I have no doubt about that. Andys motor is way fatter than the dyno said and so is adams.

[Mr Kofi Ahmed]

while I love drags i will be doing sprints as well. so the turbo selection is critical. Will definitely be looking at pon cams and adjusto exhaust gear as well.

the stage 3 hiflow of which i speak is the slide variant. will look for specs later.

Prawn cutlets and seas scallops. mmmmmmmmmmm

2835 for sure. room for the drags, nice match for the track.

[Keegs]

Part with $2400ish Noel and you have yourself the perfect turbo....the mob has spoken..well me and josh.

[Mr Kofi Ahmed]

I have no doubt about that. Andys motor is way fatter than the dyno said and so is adams.

time for a re dyno!

[Bunta]

Indeed, for Noels application I think it's 2835 FTW!!!

Its an old design but

The newest 30307s makes 1 bar by 3000rpm on a mates car

[FineLine]

I have tentively bought this, mate is in sydney this weekend and will check it out.

http://www.skylinesaustralia.com/forums/in...c=80164&hl=

[Keegs]

Its an old design but

The newest 30307s makes 1 bar by 3000rpm on a mates car

how?

[FineLine]

how?

nos

[Keegs]

I have tentively bought this, mate is in sydney this weekend and will check it out.

http://www.skylinesaustralia.com/forums/in...c=80164&hl=

jesus that is old....was looking at it for a replacement engine when I punched the rod out of my old 33..that was almost 2 years ago!!!

[Mr Kofi Ahmed]

I have tentively bought this, mate is in sydney this weekend and will check it out.

http://www.skylinesaustralia.com/forums/in...c=80164&hl=

Bit more then just a set of forgies.... If what Andy is saying is correct see if you can go for a ride in that car, a 3037s making 1bar at 3000rpm is NUTS.

so, 3000rpm with a built motor, with head work and the tomei cams u speak of will make me jizz

[FineLine]

jesus that is old....was looking at it for a replacement engine when I punched the rod out of my old 33..that was almost 2 years ago!!!

ya. it will need to be looked at closely to make sure its been stored properly.

[Bunta]

how?

nothing speial cams power Fc ect..i didn't believe him either but the sheet showed 1 bar at around 3000-3200

[FineLine]

Bit more then just a set of forgies.... If what Andy is saying is correct see if you can go for a ride in that car, a 3037s making 1bar at 3000rpm is NUTS.

so, 3000rpm with a built motor, with head work and the tomei cams u speak of will make me jizz

3000 my ass. wink wink.

[Bunta]

ya. it will need to be looked at closely to make sure its been stored properly.

what about rods, oil and water pumps, head studs ect?? Were they done?