Jump to content
SAU Community

Recommended Posts

This is my 32 had it for about 5 years now its almost there done a 2jzgte conversion that been in there about 2 years getting ready to do a E85 tune hoping to get close to 550hp at the wheels

034.jpg

036.jpg

engine_bay.jpg

When mine grows up it wants to look like yours !!!

Installed my hks coilovers last night

Left them on the same height as last owner

scrubs alittle over speed bumps ... yet to have a wheel allignment yet though

post-67206-0-55510500-1293773792_thumb.jpg

post-67206-0-50493900-1293773872_thumb.jpg

post-67206-0-18637300-1293773902_thumb.jpg

what size and width are those wheels? Also what are they exactly?

btw nice car, and peak's is bloody sweet as well.

what size and width are those wheels? Also what are they exactly?

btw nice car, and peak's is bloody sweet as well.

17x8 17x9 +34 all round. They are koya drifteks. basically the same as uras and bee*r's and Lmgt4's but without the price tag.

17x8 17x9 +34 all round. They are koya drifteks. basically the same as uras and bee*r's and Lmgt4's but without the price tag.

They look like they fill the guards nicely? I take it no huge issues with fitment?

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I’ve got one on mine and it’s fine, 
    • No, you don't want to plug the vacuum line, as that will turn that side of the booster into an air spring and probably make it feel worse. I'm not saying that the GTR master itself doesn't need a booster. I haven't paid attention to the GTR one to know what size it is cf the non-GTR ones. But when you think about it - they have to do the same job, which is to move a little slave piston a few mm to do what it is supposed to do, and that final action is the same on all the cars. So, it is very unlikely that the GTR MC is any different than the others, because it has the same pedal stroke and the same output requirement. The booster just makes it feel easier. I'd suggest you probably have an actual hydraulic problem. It's totally common on these old shitboxes.
    • Ye, in terms of bolting up the "Conversion" from a GT to a GTT is effectively "Use GTT parts for everything" Except the subframe itself, because you won't want a HICAS/4WS subframe. Remember your ABS system will be different too, thanks to GT being the S15 3 sensor system, instead of the R34 4 sensor system for wheel speed. I do not know how people get this to work given R34 diffs do not have a provision for an ABS sensor (they are on the tone wheels of the axles). I assume***** people use S15 gear/R34NA forever when they realize this - Or they convert it to a rear diff/axles that are R33 style which I presume has the singular speed sensor on the diff itself, but then you have to wire it all in and...and... and...
    • Foreshadowing was never so easy.
    • The ones in brackets are the first stages of tightening. I usually aim for the middle of the range. They give a range because it's actually not that critical to hit exactly the right bolt tension. Enough is enough, and too much is too much, and the range given is inside that range. Half of the bolts in the suspension are problematic for putting a torque wrench on anyway, so just get done up to mechanic tight  and spanner checked a week later.
×
×
  • Create New...