Jump to content
SAU Community

Recommended Posts

Hi, just wonder how do i set back the SAFC to normal setting? Because i don't want this SAFC no more, but i don't want to waste the money to let someone help me to uninstall it. Now i just want my car become standard.

Is anyone knows what's the normal or factory setting for SAFC?

cheers

steve

Link to comment
https://www.sau.com.au/forums/topic/119807-how-to-set-safc-back-2-normal/
Share on other sites

Hi, just wonder how do i set back the SAFC to normal setting? Because i don't want this SAFC no more, but i don't want to waste the money to let someone help me to uninstall it. Now i just want my car become standard.

Is anyone knows what's the normal or factory setting for SAFC?

cheers

steve

I assume you are putting you car back to stock. Theres this "initialize" mode which you can select, choose that and it should all go back to factory setting. But if dont want your SAFC anymore, just get someone to take it off, easy, dont have to reset your SAFC.

I assume you are putting you car back to stock. Theres this "initialize" mode which you can select, choose that and it should all go back to factory setting. But if dont want your SAFC anymore, just get someone to take it off, easy, dont have to reset your SAFC.

Thanks man, but where i could find the initialize mode? is it under the setting mode?

p.s. my SAFC is the bule screen one, i think is the older model than SAFC II.

cheers

steve

can the unit be unpluged from the wiring harness? if it can, just do that.

The wire is hidden in somewhere ay. The reason i want to take it of is i found it's useless and i heard many people said it will down grade the car performance ay.

I just wondering what's the factory setting like? Because when i bought the car it already came with the SAFC.

i had a safc2, It added about 30kw.. it also fixed my fuel economy issues...

Maybe if your car isnt running well or something slap it on a dyno and get someone to check the safc is doing its thing properly.

If you reset it back to factory.. the safc wont be doing anything so your car will be the same as if you didnt have it installed..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...