Fitting R34 Catback To R33

[Musky]

Just bought a HKS super drager exhaust for extremely cheap. Anyways, got under the car, everything fitted except it was about 30-35mm short of bolting up to the cat. Now before i go to my local exhaust shop i was just wondering if you guys would have any ideas?

Ive been suggested buying a couple of 3" flanges to make up the extra length? Is this feesable?

Someone else told me to cut the exhaust and weld a length of pipe on, well this would be a last resort as i dont really want to cut the thing.

Any ideas would be great guys

Musky

[T04GTR]

it will bolt up but yopul need a r34 front pipe and cat converter.

im pretty sure the flange is 180 degrees out to :

[Wogboy]

R34GT-T is around 40-50mm shorter in wheel base. I had to take 45mm out of a R33 exhaust when I put it on my R34GT-T and the flange are 180dg out. I'd add a 45mm section of stainless tube.

[Cake]

would just weld the extra length of pipe on required. if you end up selling it later down the track it will just suit an r33 then and not an r34.