Jump to content
SAU Community

Recommended Posts

Hi guys,

I have a r3425GT. It is in very good condition 99 model with 63K. But it is a non turbo. A dealer is willing to swap my car with a r32 1991 GTR with 119k. It has a fully rebuilt engine, new heavy duty clutch, new tyres and brakes, 3 year warranty on all mechanical parts, full rego.

Do you think it is a worth swap?

Any advice is appreciated.

And what sort of maintenance cost am I talking if i just plan to own the r32gtr as it is with no thrashing or modifications?

Guest Mashrock
Hi guys,

I have a r3425GT. It is in very good condition 99 model with 63K. But it is a non turbo. A dealer is willing to swap my car with a r32 1991 GTR with 119k. It has a fully rebuilt engine, new heavy duty clutch, new tyres and brakes, 3 year warranty on all mechanical parts, full rego.

Do you think it is a worth swap?

Any advice is appreciated.

And what sort of maintenance cost am I talking if i just plan to own the r32gtr as it is with no thrashing or modifications?

if a dealer is willing to swap then your in trouble :D

but the 3 year warranty sounds appealing.

the 32gtr can bend you over and f**k you in the ass. i enjoy it. haha

but rebuilt engine could be a bonus... or a minus. look into things with it.

well you have to ask yourself.. why does a car with 119,000 kms need an engine rebuild? any why would a dealer want to get rid of a GTR from their car yard but replace it with another car? they obviously want to get rid of it for some reason... it just doesn't add up

options

1) the kms are fake

2) the car has been thrashed

3) the car has been raced

4) the car has been in an accident

5) all of the above

my 2c

cheers,

Warren

Hi guys,

I have a r3425GT. It is in very good condition 99 model with 63K. But it is a non turbo. A dealer is willing to swap my car with a r32 1991 GTR with 119k. It has a fully rebuilt engine, new heavy duty clutch, new tyres and brakes, 3 year warranty on all mechanical parts, full rego.

Do you think it is a worth swap?

Any advice is appreciated.

And what sort of maintenance cost am I talking if i just plan to own the r32gtr as it is with no thrashing or modifications?

i think the dealer wants trade for the following reasons:

r32 gtr`s are like assholes atm..everyone`s got one

r32`s gtr prices are dropping like a lead balloon because of this

99 gt manual is P plate ok car (bigger market) ..gtr`s are not

finance is a lot easier to get for 99 model car(bigger market again) ..91 basically impossible

i have 5 r34`s atm and wouldn`t trade any of them on a old gtr

it makes sense to me that he would trade ..gtr would owe him approx $15k which is less than your car would cost to land and comply

Hi jake32,

thanks for your input that was very helpful,

i am really keen on getting a r32gtr,

but it is a bit hard to sell the r34 now cause it is non turbo as well,

do you think i should sell it then buy privately?

what is the market price of a r34 non turbo of my kind?

Thanks

Hi jake32,

thanks for your input that was very helpful,

i am really keen on getting a r32gtr,

but it is a bit hard to sell the r34 now cause it is non turbo as well,

do you think i should sell it then buy privately?

what is the market price of a r34 non turbo of my kind?

Thanks

non turbo MANUAL coupe which i think yours is should not be hard to sell in vic or nsw due to p plate restrictions,in my experience this is a hard car to find in japan let alone here so i would try and market it where the young guys/ p platers are..proberbly not this forum as most people allready have cars and are past the p plate issue

value not sure ..but definately worth more than 91 gtr ..just tell the dealer gtr+ a couple of grand to pay for increased insurance and running costs ..twin turbo cost a lot more to run than NA ..trust me ,partner is using 260RS as run around car atm and i reckon i would be $60 bucks a week better off when she gets the NA gt-v registered :(

WHAT EVER U DO DONT BUY FROM THEM!!!!!!!!!!!!!!!!!

I was supose to buy my 34 from them and i almost got scrued over i asked for a 34 wit 36,000 km that i had seen in the shop before and i pointed it ou to the guy he said ye ok all good and we went on to writing up the papers just before i was to sign the last bit of the papers i saw that insted of the car that i was supose to buy he had put a different model R34 which had 79,000 km on it which is not the one that i asked for he also promised to a trade in for my JEEP WRANGLER 99 for 14 grand and in the end that wasnt going to hapen as well they are shifty c**ts at that dealer ship

SO DONT BUY FROM THEM

So you guys think i should sell the car then buy a gtr separately.

But there is no warranty when i buy privately though.

I am really a newbie to turbo perfomance

what should i do?

One thing to check is how good the warranty is. Some warranties are not worth the paper they are written on. For an R32, I bet the warranty is one of the dodgy ones that covers like $1500 for an engine rebuild and about $200 for everything else. I got a 3 year warranty with my R33, and after reading the booklet, I wish now I hadn't bothered.

The question has to be asked, "why does a 119000km engine need rebuilding", but I think alot of GTRs are getting rebuilt engines with relatively low kays.

Also remember that the dealer would only be willing to swap for 2 reasons:

1) the car you are swapping for has a problem, and they want to get rid of it.

2) your car is worth more money than the car you are swapping for.

A dealer won't swap a car for one worth less than the one they have unless there is a reason - i.e. the car has problems, no-one wants it (why?) etc.

I have swapped a couple of cars with dealers, and they will try to shaft you every time, the last swap I did was a bit of a disaster, I don't think I will do that again.

As for the value of your car, GTT models go for as little as $28000 these days, so that would have to be the upper figure for a GT in primo condition.

It is a risky trade, but pretty much any R32 you buy is a risk, they are getting old and developing problems, a rebuilt engine could be a good thing if everything has been done properly, no cut corners.

If it was me, I would see how much you can get for your car (have a look in the trading post or something at similar cars and what they are selling for), sell privately, then look for another car.

Yeah the warranty won't be worth the paper its printed on...

If you try to make a claim, they will just say its modified which breaches the warranty conditions. Even if they sold you the car already modified. I got a warranty when I bought my car, and reading through the clauses and conditions you realise that you will never get money out of them.

You have already mentioned the car has a heavy duty clutch, there goes the warranty policy already....

The question has to be asked, "why does a 119000km engine need rebuilding", but I think alot of GTRs are getting rebuilt engines with relatively low kays.

Don't kid yourself, Quinny... NO car with 119,000kms should need an engine rebuild

hell, even the stock timing belt would last that long.,. why would and engine need a rebuild after such a short amount of time

the kms are so fake that its not funny. plus, something also has gone wrong with the engine

most of hte cars you describe are in the exact same condition as the one in question

I agree that an engine with 119000 genuine kms should not need rebuilding, but I am also saying that there may be a legitimate reason for the rebuild - maybe the previous owner rebuilt it as a preventative measure, maybe they overheated it and fried the engine.

My point is that if a dealer is willing to swap a "perfectly good" R32 GTR for a R34 GT, which is probably not worth much more to the car yard, then one has to ask why. Personally I think that there is some reason that the car yard is trying to get rid of the GTR. It isn't worth their while doing the swap unless the car yard is either getting rid of a car they don't want or cant sell, or the car that they are getting is worth more than the vehicle they are trading.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all, my 2004 Nissan Skyline 350GT overheated the other day with coolant boiling and leaking out of the coolant reservoir when I was parking. So today, I started it up again just to see if it was a thermostat/head gasket issue. After about 20 mins of running, temps were normal again, no coolant was leaking out and the upper reservoir hose was warm but my engine suddenly cut off. I checked the oil dipstick and cap when it was running and there was no white foamy residue and the exhaust did not have white smoke. I tried starting up the car again but it would only crank, similar to when I had a camshaft sensor issue just that now there’s no check engine light on the dash. Any ideas? Unfortunately I don’t have an OBD2 that can read the Nissan's programme.
    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
×
×
  • Create New...