Installing A Pnumatic Boost Controller

[nisskid]

just received a bleed valve which i beleive is the one shown in this thread

i need a bit of help installing it, i got a breif run down by the previous owner but he also seemed a little unsure of which way goes on which. so could someone please give me a run down of which hose goes on where?

heres a pic of the unit:

Edited May 31, 2006 by nisskid

[Thunderbolt]

1) It's not a bleed valve, it is a mechanical controller.

2) The boost source comes from the bottom of the controller (ie opposite the adjuster), and the other line goes to the wastegate acuator.

[nisskid]

yeh sorry, got that mixed up. will edit the title

Edited May 31, 2006 by nisskid

[The Dan]

make sure you wind it fully out to it's least spring tension before you start driving it around. Then you adjust it 1 turn at a time until the desired boost level is reached.

[nisskid]

this is the problem, i have just a stock boost gauge, but from what i have seen it is pretty acurate(it shows the same amount of boost as shown in my dyno print out - 11psi)