K+n Pod Air Filter Part Number

[tridentt150v]

For my '98 gtst skyline.

Buying a K+N tapered conical pod air filter, what part number is everyone using?

Also: I looked on the Apexera/Apexi site and looked at their inversion pod filter, looked OK, but no dimensions.

Needed base width, top width, length, and flange size.

[Bobjones]

Check out....

www.summitracing.com

All you need is a 3 inch opening, cannot remember the number but I have about 3 different ones that all fit, if I remember to check I will post it up

[tridentt150v]

Check out....

www.summitracing.com

All you need is a 3 inch opening, cannot remember the number but I have about 3 different ones that all fit, if I remember to check I will post it up

Bob,

I've got a 95mm OD flange[Z32 AFM]. I've presently got a HKS pod [wet foam] on it, but although I know what I'm doing and no matter which oil I use, I always end up with some on the AFM sensor - it takes a few miles for it to get there, but it generally does and then the motor starts hunting around. So I'm going to a semi dry [different oil type and setup as you would know] filter system.

I was just after numbers etc. I've ordered one, but it has to come from the USA. I would have ordered an Apexi or Blitz unit but thier www. doesn't have dimensions or specs.