Jump to content
SAU Community

Recommended Posts

Hey Guys this is my first post. Love the website very informative.

I just about to buy my first Skyline, ive never really driven a Skyline before, but been a passenger in one a couple of times.

The model i am looking at is a '97 R33 Gts-T Manual with 79,000K's on the clock

I test drove it on the weekend and it think its the one i want to get. My only convern is that when i drove it it didnt feel as powerful as i thought it would have. Everything on the car is stock including Filters and Exhaust. It just didnt have that sort of pull that other ones i have been in.

Is this normal for a stock Skyline or is something wrong? Does only get that sort of real pull when you add exhaust and a filter and other mods etc...?

Edited by Botters
Link to comment
https://www.sau.com.au/forums/topic/120812-stock-skyline/
Share on other sites

I feel that when your a passanger the car feels faster then when you're driving.

I let my mate drive mine the other night when i was passanger and i was rather impressed with my head being pushed to the head rest :) I guess when your driving you know exactly what the cars gonna do, so it doesnt feel so dramatic.

Link to comment
https://www.sau.com.au/forums/topic/120812-stock-skyline/#findComment-2226587
Share on other sites

after driving a VT executive Ls1 with 213rwkw for 3 years, my stock as a rock skyline was prettttty slow too!!:P

even though stock as a rock i did a 15.0 @92mph it wasnt too slow

once you get a few things happening, they are quick

so far ive just got cat back and a pod and did 14.5@95

either way - just enjoy the car :P

Link to comment
https://www.sau.com.au/forums/topic/120812-stock-skyline/#findComment-2226739
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm firmly on the "zero compliance is good compliance" for FUCAs. I'd be looking to solid metal joints even if the primary reason for having them is because they facilitate the twist in the arm. I have never been more happy with the way the front suspension behaves than I have since I got rid of the FUCA bushes. Even the thin little (short lived) poly bushes in the Whiteline adjustables have too much compliance for my liking. It probably won't be long before I have sphericals nearly everywhere, probably including both top and bottom arms in the rear, and I'll start complaining about the increased costs for dental work. But I will be enjoying the driving more, I'm sure.
    • Plus, you'll get great experience in bedding in pads!
    • I have offset Nismo brackets so the fact the gktechs can pivot is less important to me. I have 170mm JIC arms with bushings - but they provide no adjustment and I'm not sure whiteline eccentric bushings will fit them (I don't want to ruin the bushings currently in them to find out). Ideally I want something with bushings + adjustment; hence why I'd like to find a pair of these. Unfortunately they aren't easy to find.
    • @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
    • You miss spelled bearings...
×
×
  • Create New...