Jump to content
SAU Community

Recommended Posts

as per the thread title.

My car has begun to make this high pitched whining or whistling noise. It only happens on boost, so i've begun to suspect my turbo is on the way, like perhaps the noise is the wheel rubbing on the compressor housing or something.

Any ideas? i would have said it was a aircon comrpessor or alternator on the way, but that would probably happen off boost.

it only happens on boost (e.g. it won't happen at high rpm when decelerating)

Link to comment
https://www.sau.com.au/forums/topic/121303-turbo-on-the-way/
Share on other sites

fairly audiable, you can hear it with windows up, and it's probably loud enough for people walking past to hear, but not really loud

add..

best way to describe the noise, it sounds like a power saw sawing through wood. it's really wierd, anyone else had this?

Edited by MerlinTheHapyPig

hmmmmmmmmmmmmmmmmm

cooler leak ey... (should have thought of that...) i'd say that's the answer.

my cooler hangs lower than front bar, and i hit it on the side of a gutter the other day (popped hose on bottom of cooler) and from memory, i think this noise started shortly after i fixed that, so i'd say that's the problem.

I have a new cooler kit ready to go on in a week or so, so hopefulyl once i fix that it'll go away.

My R32 GTST has developed the exact same problem the last few days, it will do it nearly 100% of the time on boost in first gear, 50% of the time in 2nd and less as I go up in the gears, I thought intercooler leak too and checked all my silicon hose fittings etc and couldnt find any leaks but I think ill replace them all anyway as some of them look quite old,

anyone have any idea where you can buy these silicon joiners from, can you just buy them from Autobarn etc?

Edited by Dave69001

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The larger TB I had on the SS was a pain to get to idle right, but, that was cable In the end they just raised the idle up a couple of hundred RPM so it was happy idling away either in gear or in park (slush box life) I'm curious on how my NC will idle with the new intake, larger TB, and cams that are currently going in/on, but I have faith that MX5 Mania will sort this "electronical" "black magic" out the best they can in the tune with a electronic TB Sometimes I wish I knew more about the intricacies of tuning, but most of the time I don't because I know it would hurt my brain 🤣
    • That's the thing. Cam is smaller than before.. though the old cam was +6 degrees advanced. We're talking huge changes here, the narrowbands want to trim out 20% of fuel and pull the (wideband) idle to like 16.0 AFR or such. One side is a little more trimmy than the other. Think along the lines of ~20% to ~15-18%. Unfortunately my scouring of the internet hasn't really found anyone with this issue. People either just disable NB's or have them wildly different, where one is -20% and the other is +20 or 0 (i.e a sensor is just dead/wiring is just busted). Turning them off and relying on the base map only results in the wideband reporting at about 14.0 with the Varex closed. It'd be a little leaner (closer to 14.7ish) with the Varex open. I know I can just change the switch points so that the narrowbands agree with the wideband, but it's still odd. Both of them are reading voltage, it's just that they're reading quite high mv, in the ~800 region. It's just odd. This was with the IAT fudged to report it was about ~22 degrees which is my guesstimation of the temperature in the room. I have an OEM sensor ready to try tonight, which is slow and crap - but .. worked last time I used it. Sadly I am aware that idle tuning with the big TB is going to be a PITA and I look 'forward' to many hours spent stalling or stumbling idle or delving into drivability things.
    • The GTR strut brace clears the new manifold.. by about 0.5mm. So this means I need to buy an OEM GTT Strut brace (again), which will clear the new manifold, but not the bonnet vents. I guess I can sell the GTR Strut brace with the bonnet with the vents as a package deal as someone will need this one day. So my choices are vented bonnet but no strut brace, or GTR Bonnet with OEM brace (which I have to buy) but is bright red instead of the same colour as the rest of the car, which means the entire front end of the car will just be red until it goes back to paint jail. In other news the engine starts and doesn't leak. Why both O2 narrowband sensors think the tune is rich AF I do not know. The idle is also pretty shitty and my expensive IAT sensor from the USA is dead. The car sounds awful. But I assume or at least hope this is due to the many exhaust leaks, and the concrete garage it is in, sitting there with 0 intake bolted to it, and no bonnet or panels or anything to stop the induction/intake sound which is about 200db.
    • C'mon! At least come kicking and screaming into the 2000s. BA XR8 bulge.
×
×
  • Create New...