Jump to content
SAU Community

Recommended Posts

I have one and I cannot fault its performance. Quality of the piping could be better though, and you may require some modification of either the kit or your car parts to fit properly (eg in the R33 some trimming of the radiator fan blades may be needed to fit the piping).

Link to comment
https://www.sau.com.au/forums/topic/121381-just-jap/#findComment-2237674
Share on other sites

  Wink said:
I have one and I cannot fault its performance. Quality of the piping could be better though, and you may require some modification of either the kit or your car parts to fit properly (eg in the R33 some trimming of the radiator fan blades may be needed to fit the piping).

thx for that appreciate ur help

Link to comment
https://www.sau.com.au/forums/topic/121381-just-jap/#findComment-2237767
Share on other sites

You only get what you pay for. Look at the material and build quality of Jap kits (e.g. Blitz, HKS, Trust) and compare it to a $500 eBay job. It will speak for itself.

Then again, the eBay job might be sufficient for what you want. Always modify your car to a purpose or you'll get lost in a sea of parts. Work out where you want the car to be when you finish, and plan your mods around that. No use putting a top notch intercooler on if you dont plan on running some serious boost.

Link to comment
https://www.sau.com.au/forums/topic/121381-just-jap/#findComment-2238305
Share on other sites

I have a Just Jap cooler, almost all my friends have Just Jap coolers, never seen one of them with a problem, and they seem to cool just fine.

That being said none of us are running huge horsepower or huge boost, so I can't comment on that. For dailydriving cars or cars with basic mods I don't see how you can go past them.

Link to comment
https://www.sau.com.au/forums/topic/121381-just-jap/#findComment-2238353
Share on other sites

Thx for all the comments not looking to for hudge power just want a cooler that that will work well not looking to boost my car past 10 psi besides r34 gt-t turbos not recomended to be boosted past 10 psi.

thx for all ur help looks like i'll be getting one. :unsure:

Link to comment
https://www.sau.com.au/forums/topic/121381-just-jap/#findComment-2238752
Share on other sites

  R34GT-t_07 said:
Thx for all the comments not looking to for hudge power just want a cooler that that will work well not looking to boost my car past 10 psi besides r34 gt-t turbos not recomended to be boosted past 10 psi.

thx for all ur help looks like i'll be getting one. >_<

On my old R33, i was pushing 211rwkw on the std turbo, with a justjap type 1 kit. Had the kit for well over a year and held up very nicely. It also was used for trackwork with no dramas.

Installed many of these kits for people on SAU, and definately a value for money kit.

No need to pay the famous brands for their marketing and its not always "what you get is what you pay for"

Definately the kit is a easy 10/10 :)

Link to comment
https://www.sau.com.au/forums/topic/121381-just-jap/#findComment-2247796
Share on other sites

the problem with the delta fin is there will be more damage to the fins if a rock bounced up and hit it because of the design, but thats me nit picking.. has anyone had any experience with the delta fin because im thinking of getting one.

Link to comment
https://www.sau.com.au/forums/topic/121381-just-jap/#findComment-2247963
Share on other sites

  SECUR1TY said:
the problem with the delta fin is there will be more damage to the fins if a rock bounced up and hit it because of the design, but thats me nit picking.. has anyone had any experience with the delta fin because im thinking of getting one.

Have you seen them up close? I dropped by there yesterday and was having a look at one for my R32 and took some pics, let me find them and I will post them up.

VERY nice looking intercooler!

Link to comment
https://www.sau.com.au/forums/topic/121381-just-jap/#findComment-2248122
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 馃
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
  • Create New...