Jump to content
SAU Community

R33 Battery

ashraf33

By ashraf33,
in General Maintenance

 Share

Recommended Posts

RANDY Veteran

RANDY

Posted
Posted

Yikes! A decent 11-plate Century battery shouldn't cost more than $120

You might need to make sure that you get one with the correct terminal-size, as the stock terminal clamps are both of the small size.

Just ask a decent mechanic where to get one. Don't get one from a crummy joint, as the battery has probably been sitting there for yonks. Maybe call Century batteries and ask them where and how much?

Link to comment
https://www.sau.com.au/forums/topic/121465-r33-battery/#findComment-2239043
Share on other sites
NISGTS Rookie

NISGTS

Posted
Posted

Hi Dude

I was quite particular about the battery being a sealed unit as well and wanted to find one as close as to the original one that came with my R33 SII as well. Unfortunately to get one like the original jap one is virtaully impossible and even if I could I was told they cost about 3 time more in price

With this being the case I rang around got the low down on batteries and then spoke to a mob called Battery World and got a top of the range that was a sealed unit identical in size & with the breather hole.

It came to about $130 cash. I got them down in price by paying cash and to make sure that the battery was the same size I brought the original one down to compare.

It's been in the car for about a year and works just like a treat. To boot it came with a 3 year warranty as well

One other thing I found these days they don't refer to plates any more but cold cranking. I can't remeber what my was but at the time it was about the highest you could get.

So I suggest you ring around and get prices and make sure you get the best you can afford without being ripped.

Link to comment
https://www.sau.com.au/forums/topic/121465-r33-battery/#findComment-2240174
Share on other sites
Wogboy Mentor

Wogboy

Posted
Posted

I got a 560cca euro style vented battery for my R33, all I had to do was buy a new hold down clamp. Don't ever use a non-vented battery, aside for the expolsive risk, it will rust your boot out. Saw an R33 GTR with the wrong battery with a big rust streak!!

Link to comment
https://www.sau.com.au/forums/topic/121465-r33-battery/#findComment-2252414
Share on other sites
SECURITY Grand Master

SECURITY

Posted
Posted

ive got a fully sealed ROCKET battery. 13 row, 560cca with vents for $110.

got it from globe battery sales.. for anyone whos in syd the address is:

7 davies rd padstow.. you cant miss it, its got flashing lights outside it.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/121465-r33-battery/#findComment-2256933
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Sean'O
      3D printing fun

      By Sean'O · Posted

      No worries at all 🫡 I think the most satisfying things to make are the little bits that are just impossible to find or they're no longer manufactured. Generally I always try to replace parts with OEM wherever possible. This little project is also great because it'll never see the light of day, but strengthen these brackets so it's not just relying on the little standard screws in the headlight plastic. As soon as I saw the standard brackets and screws I thought, "well I'm not going to install with just the screws, the plastic tabs will just snap off". It's crazy how expensive everything has become yeah. But I suppose that's supply and demand; granted it's a lot easier to get brand new genuine parts these days which is fantastic 😊, I don't have to get totally reamed at the local Nissan dealer ha ha We sure are lucky we have all these manufacturers making parts these days, a few really great Australian companies too like Platinum Racing Products and Fit Mint Automotive, what a time to be alive ❤️ . I've got my eye on the RB26 head by PRP as mine has a very fine hairline crack, so that'll need to be addressed some time in the future. If you have any requests or odd things to make feel free to let me know and I can have a crack at making replacement parts ✌️
    • Duncan
      3D printing fun

      By Duncan · Posted

      Thanks for sharing this, and BTW if your headlights are in good condition they are worth thousands....you might want to consider replacing them with brand new LED ones like this (https://www.nengun.com/78works/full-led-headlights-r32-skyline) and making enough profit to buy a house in Sydney
    • Duncan
      R32 GTS (RB20DE) clogged cat

      By Duncan · Posted

      I'm not sure what sort of shops are nearby, but I'd expect any reasonable exhaust shop could put a cat in it that will not restrict the power that engine makes. Otherwise, if you want to remove it, short lengths that replace the cat are readily available online, search for "de-cat pipes" or "test pipes"  
    • Sean'O
      3D printing fun

      By Sean'O · Posted

      Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • GabsReDeal
      R32 GTS (RB20DE) clogged cat

      By GabsReDeal · Posted

      Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
×
×
  • Create New...