Jump to content
SAU Community

Recommended Posts

Basically started off with a random breath test on doncaster road near westfield. Blew clear, then like 20m down the road another lot were set up - the EPA for random emissions testing.

My mate got defected in his brother's 300ZX TT tonight - too low, bald rears and no number plate lights. What interested me more was that he passed the EPA random test. I will check with him tomorrow, but i'm pretty sure that this car has gutted cats... What worries me now is that if i get random EPA tested, will my car pass the emissions test...? It has a 'race cat' but i suppose the question really is - can the car still pass emssions without the cat?

Has anyone ever been random checked by the EPA?

Link to comment
https://www.sau.com.au/forums/topic/12152-epa-random-tests/
Share on other sites

OK, by what i know, they do the whole noise test and emissions test on the spot, i guess they'd do a look over of your engine bay too.

But still, CAN the car pass the emissions test without / with a gutted cat? Does anyone know?

Link to comment
https://www.sau.com.au/forums/topic/12152-epa-random-tests/#findComment-217713
Share on other sites

Faulty or no CAT will definitely show up on EGA as they will get a high hydrocarbon reading. I haven't seen the equipmeny they are using at the moment but I'm reasonably sure they haven't changed the way they check. As for the $10,000 fine, I've never heard of this being issued against any individual.....has anyone else?

Link to comment
https://www.sau.com.au/forums/topic/12152-epa-random-tests/#findComment-219017
Share on other sites

Hey Inasnt

I went for my EPA test at Macloud today... (I was suppose to go last week, but I had put it off till this week)

I passed the noise test right on the nose at 90db !!!

talk about close....

As for Emissions test - didn't even test it.. he said skylines run very clean - so he didn't bother to test it... The fact the my Low Fuel Warning Light was glaring him in the eyes while he did the noise test may have atributed to his desission not to do the emissions test.. :P

But the big thing is that the Sound test was done at 5100 rpm

(not the usual 3200 rpm that the exhaust shops test at)

He said that a Twin Turbo 2.6 L has to be tested at 5100...

At the EPA they work off a more detailed Vehicle Reference Book then the epa approved exhaust shop test centers have...

And as the test centers don't have the detailed book - they test at the default for a NA 6 cyl. which is 3200rpm....

They also also asked me if I had changed my exhaust since my last EPA test in november 2002 when it tested at 85db at an exhaust shop test center... I said "Yes, I changed it when I got this latest epa notice... if I am going to get epa notices while running with a 85 db muffler then I might as well run one that is 90db"

He said "fair enough" and passed me :P

Originally posted by INASNT

opps misread that!

Ring up a few exhaust places, 1 of em should have 1, not nuttin special from when i had to go to epa in mcloud to get mine done

Link to comment
https://www.sau.com.au/forums/topic/12152-epa-random-tests/#findComment-228871
Share on other sites

Guest INASNT

sideways

they tested my car at 5100rpm 2. I was gonna ask them wtf they were doing but since it only read 83db with thew stock exhaust i used for that day i didnt say anything.

My car was actually running rich as they told me coz i put back on all the stock stuff which changed all the flows. Did a tall guy with glasses and grey beard test your car?

Link to comment
https://www.sau.com.au/forums/topic/12152-epa-random-tests/#findComment-229384
Share on other sites

  • 1 year later...

i think theyre supposed to test at around 3/4 of the redline

for engineers certificate for my rb25 silvia, it test was carried out at 5625 (3/4 of 7500) and did 89.5 dBa on (what i think is) a 2.5" full exhaust with canon (exhaust pics here)...this is nsw though, not sure on differences with vic

Link to comment
https://www.sau.com.au/forums/topic/12152-epa-random-tests/#findComment-879634
Share on other sites

i would like to say ive been done with epa on saterday night i have no cat i got $2000 fine for waste and poulltion as i wasent sure on this in vic as i still have my south aussie plates still on my car as they didnt defect me just fine me and belive me it ant worth not haveing one it sucks for all those who dont have a cat belive me get one the fine is 2 rich and they said they catch me again and i still dont have it fixwd they well double the fine and they keep on double it until u get one so go and getone mates

Link to comment
https://www.sau.com.au/forums/topic/12152-epa-random-tests/#findComment-881984
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don’t really have any ideas how to set the timing on the CAS 😂, sounds like the top, sounds like it maybe misfiring as well as ticking,  got the box sorted 😌, must of been a air bubble on the clutch side
    • Use a 2' length of hose (that's 2 foot, not 2 inches) as a stethoscope to localise the source of the ticking. From cam covers? From exhaust or turbo manifold gasket? From injectors? From lower down in the engine? Etc. Use a timing light to set the timing. Put Redline Lightweight Shockproof in the box. It's not the very best thing for the box, but it will take a box that refuses to engage a gear with other oil, and make it engage a gear. I had to put it in when I installed the R33 box I have in my car. It would not select ANY gear when running. Smurf jizz made it work. That was >10 years ago and I still use it. I'm stuck with it now. Failing that - rebuild the box.
    • Well done Duncan. The fuel tank bulkhead lid is also in great condition (some of mine were stuffed). These are now out of production and good ones like that are becoming hard to come by.
    • Wow that's a steal, you've done well there. 
    • Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
×
×
  • Create New...