Fuel Filter

[123456]

wheres it located on a rb20det? i cant see anything that looks like a filter in any of the images ive seen.. is it like a silver barrel about 2 inches long and 1 inch wide that looks like its connected to 2 hoses and has like the letters A G L A or something on it?

[blind_elk]

Silver barrel, basically located under the brake master cylinder.

[Jinman]

Anyone know the correct part number for a RB20 fuel filter. Repco gave me the wrong one last time i bought one.

[The Dan]

Anyone know the correct part number for a RB20 fuel filter. Repco gave me the wrong one last time i bought one.

Should be a Z387.

[Konrad]

Dunno if it helps but z200 seems to be the right one for a r33 (just eyeballed it since there was like 3 part code listings for them wtf) , dunno about r32.

[TTT]

fuel filter is between drivers side suspension tower and intake manifold.

it looks like a cylinder.

about 2 inches in diameter

[217/r33]

Just replaced mine a week ago. Was $16 at repco but walked away with it for $10. There are a few listings they will all do the job. Just make sure it looks about the same. One of them is with a 90' deg bent tube.

Cheers,

Alex.

[The Dan]

The 387 is the listed part for the RB20DET but you can use any of the fuel filter of the same diameter. The 33's do take a z200 but only in the GTST from memory. The GTR still retained the Z387.

Make sure you buy two meters of EFI fuel hose too. Usually they are perished anyway and for the extra $20 it makes it easier when you change it over. The hose takes 3 days to get off so it's easier if you undo the clamp, move the clamp away and use a stanley knife to cut the hose lengthways. This will make the hose literally fall off. Then you just cut same length pieces for the new filter and pre clamp them before installing.

[MerlinTheHapyPig]

i didn't need to cut the hose or anything, my hoses were fine, so i didn't replace them

the one i got sold didn't have the 90deg bend, (same filter, but both lines were straight) so it didn't fit in the bracket properly. still does the job though.