Jump to content
SAU Community

Recommended Posts

Ok time to clear out some of the parts in my shed due to moving house.

KKK K27 turbo, 600-odd hp turbo, t3 flanged ext gated ~1.00 rear housing. 76mm 40T compressor and 76mm turbine. Needs new seals as the exhaust side is leaking oil. (approx $600 for full rebuild) good for a rotor or rb30, was alittle big for my rb20 spooled at 5K. still made 220rwkw on 10psi though.

$300

Set of RB20DET R32 injectors - Sold

Set of RB20DET Nics HR31 Injectors - $40

RB20/25 Exhaust manifold - $40

HR31 HICAS Lock bars, replaces your rams with rose jointed bars. - Sold

HKS F-Con V Pro Version 2.1 for RB25DET, was tuned to run an RB24DET with twin injectors, K27 turbo, big front mount, etc. made 220rwkw on 10psi. - $300

Repco thermo fans

16" - $60

14" - $50

12" - $40

HR31 Headlights (not projector type) - $60

:P

Karl

Edited by kwazza11
Link to comment
https://www.sau.com.au/forums/topic/121717-garage-clearout/
Share on other sites

hey will you send interstate to NSW the following items?

Repco thermo fans

16" - $60

HR31 Radiator - $30 (does this suit all r31 series RB20DET Motors ? )

what price will you do including postage ?

Cheers

Matt

Please send PM as i dont always look over for sale items

Link to comment
https://www.sau.com.au/forums/topic/121717-garage-clearout/#findComment-2248758
Share on other sites

this F-Con won't suit an RB20DET and Unless your mechanic is BD4's or Croydon's theres no point in asking as he wont be able to tune this ECU.

as for the O2 sensor, its as old as the motor which was a '91 rb20det. its in excellent condition.

PM me if your still interested.

Link to comment
https://www.sau.com.au/forums/topic/121717-garage-clearout/#findComment-2262994
Share on other sites

Selling it due to being in adelaide and i changed the turbo setup so needed a remap, the only option was to buy another ecu or get it transported to sydney for a tune (yea right)!

email BD4's and ask them if they can rewire it to suit, they may even sell a loom for it if your lucky, i've done exactly the same thing with a power fc (used an rb25det fc with an rb20 loom) but it requires a few wires swapped around.

Link to comment
https://www.sau.com.au/forums/topic/121717-garage-clearout/#findComment-2263360
Share on other sites

  • 2 weeks later...

Just some information, the F-CON just requires a new harness... BD4s will be able to supply one, and you are correct in saying it may or may not need some extra wires / less wires :thanks:

Link to comment
https://www.sau.com.au/forums/topic/121717-garage-clearout/#findComment-2282602
Share on other sites

interested in finding out more about the hicas lock bars?

Was under the impression lock bars don't work on the HR31 system but want to get rid of my Hicas, so if it works...pm me

PM sent.

FYI everyone else, heres a high res pic of them installed on my coupe. :rofl:

post-1089-1151219307.jpg

Link to comment
https://www.sau.com.au/forums/topic/121717-garage-clearout/#findComment-2283365
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Done about 5k Km on the PS5's now, excellent street tyres, great in the dry, and the wet, seem to be wearing very well, I haven't measured tread depth, but it looks like minimal wear, I also had a different alignment done about 1500km ago,  From looking at the tread wear, which is really only minimal, the alignment changes were based off how the tread looked, and how it felt throwing it around, the changes have shown great results 215/45 17 at 32 psi Front Caster: 5.5° Camber: -1.5° Toe: 0.0mm Rear Camber: -1.0° Total Toe-in: 1.5mm I actually prefer PS5's now over the RS4's, as the PS5's are much better in the wet IMO, and as the MX5 gets driven in all weather conditions doing daily duties, hwy trips, and blasts in the mountains, wet weather grip is high on my priority list
    • To update this thread. I got sent a replacement Attesa pro unit and all is now working as expected. Cheers
    • FD is so sexy she can pull off tri-spokes
    • Indeed they do. Best my diff builder could tell is it's a combination of the different cut/angle and it would seem they lap them in well on accell but less so on decel. He had to use a slightly different pattern to the lap to get the best result noise wise. Also as the rear diff runs in, the whine is getting less.        Overall they seem like a good thing so far. He's done a few neat crown/pinion before but all for race cars with loud everything, in most cases the exhaust is louder, so I am the first to notice.... and be somewhat of a pain   
    • What do you mean by "test"? It sounds like you're just switching things on and off that you already know don't work. Get the wiring diagram and a multimeter and start looking for power where there is supposed to be power and earth where there is supposed to be earth. Look for continuity across switches that are otherwise unresponsive, etc etc.
×
×
  • Create New...